Apart CM60DTD

Player je jedan od regionalnih lidera u prodaji muzičke opreme i instrumenata.

U ponudi ima širok asortiman najeminentnijih svetskih proizvođača studijske, Pro,
DJ opreme, i rasvete.

Svakom kupovinom, dobija se fiskalni račun i garancija u trajanju od dve godine,
sa obezbeđenim zvaničnim servisom.

Moguće je plaćanje na 12 rata Banca Intesa kreditnim karticama - ukoliko robu kupite preko našeg web shopa ili u našim prodavnicama.

Za svaku kupovinu u vrednosti preko 2000 RSD poštarina je besplatna
na teritoriji Srbije!

Kako biste pogledali kompletan asortiman proizvoda, posetite naš web shop.

The CM60DTD 6.5” two-way versatile built-in loudspeaker is suitable for the distribution of speech and music at a higher volume level. It provides a powerful high-end, dynamic, warm sound due to the tuned bass reflex port and controlled performance. The loudspeaker can be installed by two loudspeaker clamps only, which speeds-up installation and reduces labor time. The 70/100-volt power tapping can be selected on the front and also offers 16 ohms connectivity. The CM60DTD comes with thin edge grill and integrated neodymium grill fixing magnets which allows an inconspicuous integration matching the surroundings of your venue.

FEATURES

• Requires only 6.2" (157 mm) mounting depth
• High speech intelligibility coupled with full-range music reproduction
• Thin-edge, magnetically attached grille
• Tap switch allows for 70V/100V or 16Ω low impedance operation
• Tuned bass reflex port for optimized low frequency performance
• Loudspeaker overload protection for 24/7 failsafe operation
• ETL listed to conform with UL Std 1480A and UL 2043; Certified to CSA C22.2#62368-1

TECHNICAL SPECIFICATIONS

Operating Mode - Passive

Operating Environment - Indoor

Operating Range - (-10dB)75 Hz to 22 kHz

Nominal Beamwidth - (H x V)150° conical

Transducers - LF 1 x 6.5" (165 mm) coated paper cone,  HF 1 x 1" (25 mm) soft dome

Continuous Power Handling@ Nominal Impedance - 31V60W @ 16Ω (240W peak)

Nominal Sensitivity @ 1m - @ 1W86 dB@ 2.83V83 dB

Nominal Maximum SPL @ 1m - Peak110 dBContinuous104 dB

Transformer - 70V: 60W, 30W, 15W, 7.5W, 3.75W100V: 60W, 30W, 15W, 7.5W

Protection - 3-step self-resetting protection

Recommended Amplifiers - 60W - 120W @ 16Ω (31V - 44V)

PHYSICAL

Input Connection - (1) 4-way Euroblock connector with permanent pass-through

Mounting Provisions - 2 mounting clamps with grip range of 0.2" - 2.6" (3 - 65 mm);  Cover plate with 0.75" (22 mm) NPT knockout for conduit connectors

Safety Features - 2 hang points

Compliance - ETL listed to comply with UL 1480A and UL 2043;  Certified to CSA C22.2#62368-1; Suitable for use in air handling spaces per NFPA 70, NFPA 90

Dimensions H x Dia.  - 6.2" x 10.2" (157 mm x 258 mm)

Cutout Diameter - 9.1" (232 mm)Weight8.8 lbs (4.0 kg)

Finish - Refer to the Technical Drawings (page 3)

Accessories (included) - Tile rails; tile rail spacers; cutout templat

OPTIONS

Accessories - SQGR square grille