Raspberry Pi Pico MicroPython kit za programiranje

SKU:  19693
Part Number:  Raspberry-Pi-Pico-Basic-Kit

Raspberry Pi Pico Basic Kit, MicroPython Programming Learning Kit Raspberry Pi Pico Basic Kit

Basic entry-level kit prepared for Pico

Tested And Selected By Professional Engineer, With Rich Tutorials And Resources
Fast Getting Started With Raspberry Pi Pico And MicroPython Programming

What's In The Kit

Raspberry Pi Pico With Pre-Soldered Header

A Low-Cost, High-Performance Microcontroller Board With Flexible Digital Interfaces

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 x12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support

LCD1602 RGB Module LCD1602 RGB backlight character LCD, using I2C bus to display text or adjust RGB backlight

PIR motion sensor Pyroelectric IR sensor, outputs electric switch signal when IR array from human/animal body is detected

8-Bit WS2812 RGB LED 8x RGB LED, play around with cool light effects by programming

Alarm Quality active announciator, used for alarming or playing music

Single-joint potentiometer Adjustable potentiometer, 0~10K range, used for ADC test, volume/brightness adjustment, etc.

Round buttons Three colors, for button/switch detection

5mm LED Three colors, for experiments like traffic light, PWM adjusted light, etc.

330R resistors Providing current-limit protection when connected with LED in series

Breadboard and wires Jumper wires Quality 830 breadboard and sorts of wires, easy for connecting components

Plastic box Customized box for storing the modules and components

Wiki:  Raspberry_Pi_Pico

PACKAGE CONTENT

Weight:  0.404 kg

1. Raspberry Pi Pico with pre-soldered header          x1
2. Breadboard                                                             x1
3. 1*3PIN yellow pin header                                       x1
4. USB-A to micro-B cable                                          x1
5. PIR sensor                                                               x2
6. Breadboard wires                                                    x1
7. Single-joint potentiometer                                     x1
8. 8-Bit WS2812 RGB LED                                           x1
9. Round button                                                          x3
10. Alarm                                                                      x1
11. 330R resistor                                                          x10
12. 5mm LED                                                                x6
13. LCD1602 RGB Module                                            x1
14. Jumper wire female-female 10PIN                         x1
15. Jumper wire male-female 10PIN                            x1
16. Plastic storage box                                                 x1

w19693

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.