> Multimetar i osciloskop ET828 <

Kombinacija multimetra i osciloskopa u jednom kucistu.

Osciloskop radi do 1MHz (realno upotrebljiv do 200-300KHz) i prikazuje signal sa obicnih pipalica, nije mu potrebna sonda za osciloskop.

Po mom misljenju odlicna varijanta za auto elektriku i elektroniku.

 

Instrument je nov, samo testiran.

 

Description Report Item

• 2 in 1 Digital Oscilloscope Multimeter : This product is a versatile tool that can be used as both an oscilloscope and a multimeter, making it a great value for DIY enthusiasts.

 

• 2.4 Inch Color Screen : The large color screen provides clear and easy-to-read displays, making it easy to diagnose issues with electrical circuits.

 

• 2.5Msps Sampling Rate : With a sampling rate of 2.5Msps, this oscilloscope can capture and display signals accurately and quickly, making it ideal for troubleshooting complex circuits.

 

• CE Certification : This product has been certified by CE, ensuring that it meets high safety and quality standards, giving you peace of mind when using it on your projects.

 

Features:

1. One button waveform capture , intelligent and easy to use, improve work efficiency

2. Two-In-One : 2.5Msps high-speed sampling, 1MHz analog bandwidth Oscilloscope + 4000 counts display digital multimeter

3. High voltage oscilloscope:  In the oscilloscope state, it can measure up to 565V AC voltage, with peak to peak voltage reaching 1600Vp-p

4. Powerful uses: it can be used in different application such as DIY electrical design , car overhaul, production line, equipment maintenance, and power system

5. Color screen display: 2.4 inch color screen, clear waveform display

6. Multi-function multimeter: 4000 counts display, fast and accurate measurement of AC/DC current, resistance, capacitance, frequency, duty cycle, diode, continuity

7. Oscilloscope parameter independent setting : Auto/Normal/Single scanning modes, time base, amplitude, rising edge, falling edge and level

8. Can store 100 sets of data and 10 sets of waveform. Historical data and real-time display can be displayed on same screen, greatly facilitating the analysis of data

9. Panel calibration, memory calibration coefficients do not need potentiometer adjustment, higher reliability.

10. Overload protection 500mA/10A double fuse, double protection meter.

   

Specifications:

Display:240X320 LCD Screen

Display area: about 2.4 inches

Backlight: White

Input resistance : 10MΩ

Battery : AA battery x 3(not included)

Power consumption : About 80mA

Use time : Low light about 5 hours

Storage : 100 Data,10 Waveforms

Use: 0 ° C - + 40 ° C; <75% RH

Storage : -10 ° C 〜+ 60 0 C; <90% RH

Size: 83x160x32(mm)

Weight: About 195g (without battery)

 

Oscilloscope characteristics

Analog bandwidth: 1MHz (limited to ACV oscilloscope)

Maximum real-time sampling rate: 2.5Msps

Number of channels: 1

Input impedance: about 10MΩ

Vertical sensitivity range: 300mV - 100V/grid

Time base range: 2.5us - 10s/div

Vertical amplitude accuracy: ± (5%+ 0.2div)

Time base accuracy: ± (0.01% + 0.1div)

Scan mode: Auto/normal/Single

Trigger edge selection: rising edge/falling edge

Automatic setting: automatically set the time base and vertical amplitude

Automatic measurement function: Vp-p, Vavg, Vrms, Hz

 

Multimeter Specification

Features Range Uncertainty

DC voltage 400mV,4V/40V/400/1000V ± (1.5% RDG + 10dgt)

AC voltage 400mV/4V/40V/400/750V ± (1.0% RDG + 10dgt)

DC Current 40mA/400mA,4A/10A ± (1.2% rdg+10dgt)

AC Current 40mA/400mA,4A/10A ± (1.5% rdg+10dgt)

Resistance 400.0Ω ~40.00MΩ ± (1.0% rdg+5dgt)

Capacity 51.2nF ~ 100uF,10.00mF ± (3.0% RDG + 5dgt)

Frequency 5Hz 〜5MHz ± (1.0% rdg+5dgt)

Diode test: Voltage is about 1.5V

Continuity test: Judgment Resistance about: <50Ω beep

Fuse : 500mA/250V, 10A/250V