USB na TTL (D) Serial Cable, FT232RNL, za Raspberry Pi 5

SKU:  26738
Part Number:  USB TO TTL (D)
Brand:  Waveshare

Korisne informacije:

www. waveshare. com/wiki/USB_TO_TTL_(D)

Features

• Adopts original FT232RNL chip, with stable high-speed communication, reliability, and better compatibility.
• Built-in self-recovery fuse and ESD for over-current/over-voltage protection, counter-current proof, improving shock resistance.
• Onboard IO protection, anti-surge design, with stable communication and safety.
• Onboard TTL serial port 3.3V/5V level transilation circuit, for switching TTL communication level.
• Onboard 3x LED indicator, for checking power and signal transmitting status.
• Plastic case, sandblasting process, nice-looking and compact.

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Separated 4pin Header + SH1.0 3PIN Connector, Suitable For Raspberry Pi 5 Serial Port Debugging Industrial USB To TTL Serial Cable Type D

Original FT232RNL | Stable Transmission | Multi Devices | Multi Systems

Suitable for serial port debugging of industrial equipments, supports Raspberry Pi 

Industrial USB TO TTL serial cable, adopts original FT232RNL chip, onboard power supply and signal indicators, supports 3.3V/5V voltage level switching, built in self-recovery fuse, ESD and IO protection diode circuits, etc. It is compact in size, suitable for serial port debugging of industrial equipments and can be directly connected to the Raspberry Pi 5.

Specifications

PRODUCT CATEGORY: Industrial USB TO TTL serial cable

CHIP SCHEME: FTDI original FT232RNL

HOST PORT: USB

DATA RATE: 300bps ~ 3Mbps

DEVICE PORT: UART

USB PORT: Connector - USB-A; Protection - self-recovery fuse, ESD protection

UART PORT: Connector - separated 4pin female header + SH1.0 3PIN fool-proof connector; Protection - IO protection diode

INDICATOR: PWR - power indicator, turns on when there is USB connection and voltage is detected; TXD - TX indicator, turns on while the USB port is sending data; RXD - RX indicator, turns on while the device port is sending data back

CABLE: Black, PVC sheath, total length 1m

Onboard Original Chips

Adopts Original FT232RNL Chips, Providing Better Stability And Compatibility

Raspberry Pi UART Debugging

Suitable For Raspberry Pi, Supports Multiple Connection Methods

Three LED Indicators

Easily Checking The Operating Status, Convenient For Programming / Debugging

VCC: 3.3V or 5V output, configured by switch

GND: Ground

TXD: Connecting to MCU. RXD (signal direction: MCU. RX < < FT232 < < PC. TX)

RXD: Connecting to MCU. TXD (signal direction: MCU. TX > > FT232 > > PC. RX)

PACKAGE CONTENT

Weight:  0.047 kg

USB TO TTL (D) x1

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.