Server FUJITSU PRIMERGY RX 1330 M3

Server FUJITSU PRIMERGY RX 1330 M3

• U perfektnom stanju, kao novo
• 8GB DDR4 RAM (Može ukupno 64)
• 2 kadice za HDD ili SSD (bez diskova) i 2 maske
• Xeon® processor E3-1200 v6
• Radna garancija 1 mesec
• Novija generacija
• Odličan za manji i srednji biznis
• Više komada

Data Sheet Fujitsu PRIMERGY RX1330 M3 Server
Page 3 / 9 www. fujitsu. com/global/products/computing/servers/primergy/rack/rx1330m3/
Technical details
PRIMERGY RX1330 M3
Mainboard
Mainboard type D3375
Chipset Intel® C236
Processor quantity and type 1 x Intel® Xeon® processor E3-1200 v6 product family / Intel® Core™ i3 processor / Intel® Pentium® processor / Intel®
Celeron® processor
Graphics add on cards Entry 3D: NVIDIA® Quadro® P400 , 2 GB, PCIe x16, 3 x miniDP
Memory slots 4 (2 banks with 2 DIMMs each)
Memory slot type DIMM (DDR4)
Memory capacity (min. - max. ) 4 GB - 64 GB
Memory protection ECC
Memory notes Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered.
Capacity per channel has to be the same.
Interfaces
USB 3. x ports 6 x (2x front, 4x rear) (10x 2.5” HDD base unit: 1x USB 2.0, 4x rear USB 3.0)
Graphics (15-pin) 1 x VGA (15-pin) / optional 1 x front VGA (not for 10x 2.5” HDD base unit)
Serial connection 1 x serial RS-232-C
LAN / Ethernet (RJ-45) 2 x 1 Gbit/s Ethernet
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller Integrated RAID 0/1 or RAID 5/6 controller (option)
All hardware storage controller options are described under Components
SATA Controller Intel® C236, 1 port used for accessible drive or SATA DOM
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
LAN Controller Intel® i210 onboard
2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration)
iSCSI, PXE-Boot and WoL are supported
Remote management controller Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM) Infineon / TPM 1.2 or TPM 2.0 module; TCG compliant (option)
Slots
PCI-Express 3.0 x4 1 x Low profile
PCI-Express 3.0 x8 2 x Low profile Length 175mm; PCIe slot#1 = dedicated Modular RAID slot
Slot Notes Optional support of 1x full height PCIe Gen3 x8 card, instead of 1x PCIe Gen2 x4 and 1x PCIe Gen3 x8
Drive bays
Storage drive bays 4/8 x 2.5-inch hot-plug SAS/SATA or 4x 3.5-inch hot-plug SAS/SATA or 10 x 2.5-inch hot-plug SAS/SATA
Accessible drive bays 1 x 5.25/0.4-inch for CD-RW/DVD
Notes accessible drives Following limitations applies to 10x 2.5-inch HDD base unit: No CD-RW/DVD, 1x USB 2.0 at the front, no front VGA
Fan Configuration
Number of fans 4
Fan notes 4 fans in combin