7.3 inča, e-paper HAT (G), 800x480, crveni, žuti, crni, beli

SKU:  22772
Part Number:  7.3inch e-Paper HAT (G)
Brand:  Waveshare

 

7.3inch E-Paper HAT (G), 800 × 480, Red/Yellow/Black/White 7.3″ E-Paper HAT (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments…

 

 

Features At A Glance

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

 

Specifications

 

OPERATING VOLTAGE 3.3V/5V

DISPLAY COLOR Red/Yellow/Black/White

INTERFACE 3-wire SPI, 4-wire SPI

GREY SCALE 2

OUTLINE DIMENSIONS 170.2 × 111.2mm

FULL REFRESH TIME 16s

DISPLAY SIZE 160 × 96mm

REFRESH POWER <85mW (typ. )

DOT PITCH 0.2 × 0.2 mm

STANDBY CURRENT <0.01uA (almost none)

RESOLUTION 800×480 pixels

VIEWING ANGLE >170°

 

 

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

 

 

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

 

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

 

 

VCC Power (3.3V / 5V input)

GND Ground

DIN SPI MOSI pin

CLK SPI SCK pin

CS SPI chip selection, low active

DC Data/Command selection (high for data, low for command)

RST External reset, low active

BUSY Busy status output pin

 

 

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…

 

 

WIKI:  www. waveshare. com/wiki/7.3inch_e-Paper_HAT_(G)

 

 

PACKAGE CONTENT

 

 

Weight:  0.061 kg

1. 7.3inch e-Paper (G) x1
2. Driver Board and FFC cable x1
3. PH2.0 20cm 8Pin x1

 

 

 ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.