KV2 ES 1.0

SAMO ORIGINAL KV2 SA NJIHOVIM PROCESORSKIM POJACALIMA RADI ONAKO KAKO KV2 TREBA DA RADI !   

IMAJTE TO NA UMU !

Kompaktna i mala trosistemska pasivna zvučna kutija najvišeg kvaliteta i neverovatne snage,   s 1.75" visokotoncem, 6" srednjotoncem 12" Mid-Bas zvučnikom. Potreban joj je EPAK 2500 za snagu. Mogućnost kombinovanja sa širokim spektrom subwoofera iz ES serije. Namenjena u aplikacijama do 3000 ljudi.

Features

• Professional Baltic birch construction with wear resistant polymer coating
• 131dB sustained output, 134dB peak
• Controlled wide dispersion 90° x 40° , rotatable mid-high horn for mounting in vertical or horizontal orientation
• 1.75" (44 mm) Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, incredibly low distortion and extended frequency response
• 6" mid-range driver with a 1.75" (44 mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight
• Horn loaded, 12" mid-bass driver with a 3" (76 mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure
• Three way active requirement – 900W from the EPAK2500/R providing 600W for the 12" low mid, 200W for the 6" midrange and 100W for the high frequency driver
• Proprietary side handle design for simlified handling and carrying
• High impact low friction feet, asymmetrically located on three sides allowing vertical or horizontal system set up, lock-in and easy cabinet movement
• Four internal corner braces tied to eight M10 suspension points. A total of 24 suspension points are available for custom installation applications
• Top hat for pole mounting applications
• Weather proofing option and special paint finishes available on request

System Acoustic Performance

Max SPL Long-term 131dB
Max SPL Peak 134dB
-3dB Response 130Hz to 20kHz
-10dB Response 85Hz to 28kHz
Impedance Low 16Ω Mid 8Ω High 8Ω
Crossover Point 130Hz, 500Hz, 2.5kHz

High Frequency Section
High Horn Coverage Horizontal / Vertical 90° x 40° rotatable
High Frequency Amplifier Requirement 100W from EPAK 2500/R
Throat Exit Diameter / Diaphragm Size 1" / 1.75"
Diaphragm Material Titanium
Magnet Type Neodymium

Mid Range Section
Acoustic Design Horn Loaded
Mid Horn Coverage Horizontal / Vertical 90° x 40° rotatable
Midrange Amplifier Requirement 200W from EPAK 2500/R
Woofer Size / Voice Coil Diameter / Design 6" / 1.75"
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Mid-Bass Section
Acoustic Design Horn Loaded
Mid-bass Amplifier Requirement 600W from EPAK 2500/R
Woofer Size / Voice Coil Diameter / Design 12" / 3" / Inside Outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Speaker Input
Speaker Input AP6

Cabinet
Cabinet Material Baltic birch
Handles 2
Pole Mount 35 mm
Color "Orange peeled" Matt Black or any RAL

Physical Dimensions
Height 700 mm (27.55")
Width 450 mm (17.71")
Depth 450 mm (17.71")
Weight 34 kg (74.8lbs)

Na našoj web stranici kod svakog artikla istaknuta je oznaka da li je artikal na stanju („ “ ) - 

- Trudimo se da sve cene držimo aktuelnim na svakodnevnom nivou, greške su moguće. Cena na KP je informativnog karaktera, informaciju o ceni proverite u našim radnjama.

- Plaćanje u našim maloprodajnim objektima vrši se isključivo u DINARIMA. Cena napisana u evrima je informativnog karaktera.

- Ukoliko vidite bilo gde bolju cenu za nov proizvod, kontaktirajte nas i mi ćemo se potruditi da napravimo najbolju ponudu za Vas.

Hvala na razumevanju.

Vaš AudioPro Artist