Inverto quad monoblock 3 stepena

Main Features

• Low Phase Noise, DVB-S2 (HDTV) compliant
• Low Noise Figure (0.2 dB)
• Low Power Consumption
• Very high Cross Polarization Isolation
• Very high Frequency Stability

Technical specifications Low band input frequency range 10.7 GHz ~ 11.7 GHz Low band output frequency range 950 MHz ~ 1950 MHz Low band LO frequency 9.75 GHz High band input frequency range 11.7 GHz ~ 12.75 GHz High band output frequency range 1100 MHz ~ 2150 MHz High band LO frequency 10.6 GHz Noise figure 0.2 dB typ. (0.7 dB max. )  LO temperature drift ±3.0 MHz Max. LO initial accuracy @ 25 ° C

±1.0 MHz Max. LO phase noise @ 10 kHz -80 dBc / Hz max. Conversion gain 50 dB ~ 60 dB Gain ripple (over 26 MHz bandwidth) ±0.75 dB Gain variation (over full band) ±4 dB max. Image rejection 40 dB min. 1 dB compression point (@ output) 0.0 dBm min. Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = East Satellite Position, Sat B = West Satellite Position) 
* Default Satellite Reception Cross polarization isolation 22 dB min. Output VSWR 2.5 : 1  In band spurious level -60 dBm max. Current consumption 250 mA max. @ 11 V ~ 20 V Operating temperature -30 ° C  ~  +60 ° C Output impedance 75 Ω Output connector type F-Type (female) Recommended Dish Size 75-85 cm (F/D = 0.6) Weight 485 g