ESP32-S2 MCU WiFi razvojna ploča, 240MHz, 2.4 GHz WiFi

ESP32-S2 MCU WiFi razvojna ploča, 240MHz, 2.4 GHz WiFi (standardna verzija bez pinova i displeja)


SKU:  20624
Part Number:  ESP32-S2-Pico
Brand:  Waveshare


2.4 GHz WiFi Development Board Based On Microcontroller ESP32-S2, 240MHz ESP32-S2 WiFi Development Board

240 MHz Xtensa single-core 32-bit LX7 microcontroller

For C/C++ SDK, MicroPython, CircuitPython Development

Board Specifications

This is a WiFi development board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, supporting Raspberry Pi Pico expansion board ecosystem. Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc.

ESP32-S2 Standard Ver. key features include:

• Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development
• Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz
• Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory
• Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
• USB-C connector, no more plug orientation problem
• On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
• On-board 1.8A current high efficiency boost/buck DC-DC TPS63000 power supply IC
• Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios
• Castellated module allows soldering direct to user-designed carrier boards

ESP32-S2 LCD Ver. key features include:

• All features of the ESP32-S2 Standard Ver.
• On-board 0.96inch 160×80 pixels 65K color IPS LCD display
• On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design

C/C++, MicroPython, CircuitPython Support

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

 
240 MHz High Frequency Processor

Xtensa Single-Core 32-Bit LX7 Microprocessor, Up To 240 MHz Frequency

26 × Multi-Function GPIO Pins

Configurable Pin Function, Allows Flexible Development And Integration

ESP32-S2 Standard Ver. Pinout

WIKI:  ESP32-S2-Pico


 PACKAGE CONTENT

Weight:  0.005 kg


ESP32-S2-Pico

1. ESP32-S2-Pico (Standard Ver. )                          x1

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.