Kenwood KA-880SD

SuperDLD Integrated Amplifier
Rated Output (Both Channel Operation)    
20 Hz to 20 kHz :    120W + 120W (6 Ω , THD 0.008%)
100W + 100W (8 Ω , THD 0.004%)
1kHz:    105W + 105W (8 Ω , THD 0.004%)
Total harmonic distortion rate (20 Hz to 20 kHz)    
Phono to SP terminal :    0.005% (at rated output)
Tuner, AUX, Tape-to-SP connector :    0.005% (8 Ω at rated output)
0.004% (at 1/2 rated output)
Intermodulation distortion factor (60 hz : 7 khz = 4 : 1)    Tuenr, AUX, Tape → SP terminals : 0.005% (8 Ω at rated power)
Frequency characteristic    Tuner, AUX, Tape → SP terminal : DC ~ 200 khz + 0 -3dB
Damping factor (50 Hz)    1000
Input Sensitivity / Impedance    Phono MM : 2.5mV/47k Ω
Phono MC : 0.2mV/100 Ω
Tuner, AUX, Tape : 150mV/47k Ω
Signal-to-noise ratio (IHF-A)    Phono MM → SP terminal : 86 dB
Phono MC → SP terminal : 70 dB (250 μ V)
Tuner, AUX, Tape → SP terminal : 107 db
Tone control    200 Hz : 100 Hz + / - 10 dB
3 kHz : 10 kHz ± 10 dB
Loudness control    + 9 dB (100 Hz, Volume-30dB)
Subsonic filter (-3dB)    18 Hz, 6dB/oct.
Rise time    Tuenr, AUX, Tape → SP terminals : 1.7 μ s
Output bandwidth (0.04% distortion factor)    Tuner, AUX, Tape → SP connector : 5 hz to 50 khz
Phono maximum allowable input
(1 kHz, THD 0.003%)    Phono MM:200mV
Phono MC:15mV
Phono RIAA deviation (20 Hz to 20 kHz)    ± 0.3 dB
Output Level / Impedance    TapeC/Video : 150mV/220 Ω
Tape Rec : 150mV/220 Ω
Pwer    100 VAC, 50Hz/60Hz
Rated power consumption (Electrical Appliance and Material Control Law)    200W
Power outlet    Power switch interlock : 2 systems, 100W
Power switch not linked : 1 system, 400W
External dimensions    Width 440x Height 133x Depth 333 mm
Weight    9.4kg