SONY SS-5050

A 3-way speaker system that uses a CARBOCON for the diaphragm.

A 30 cm cone type woofer is installed in the low range.
The diaphragm is made of CARBOCON with improved rigidity by mixing carbon fibers with cone paper, and resonance is suppressed by mixing carbon fibers radially into the rubber edge.

Equipped with a 3.5 cm dome mid-range in the mid-range and a 2.5 cm dome tweeter in the high-range.
These units use newly developed laminated vibration plates.

A low-distortion magnetic circuit has been adopted to reduce odd-order harmonic distortion in the mid - and high-frequency range, enabling clearer sound reproduction.

The Network Division focuses on selective selection of parts and simplification of configuration, and improves transient characteristics and phase characteristics.

The enclosure is hermetically sealed, with sealing and packing material at critical points to keep the air from inside and outside, and the baffle plate and back plate are reinforced effectively to disperse plate vibration.
A dark-tone net with a aluminum sash on the side is used for the Sa RUNNET.

Method    3-Way, 3-Speaker, Airtight Type, Bookshelf Type
Unit    For low band : 30 cm cone type
For Middle Area : 3.5 cm Dome Type
For high-pass : 2.5 cm dome type
Effective frequency band    40 Hz to 20 kHz
Output sound pressure level    91dB/W/m
Impedance    8 Ω
Maximum allowable input    80W
Crossover frequency    1.5 kHz, 10 kHz
External dimensions    Width 365x Height 630x Depth 318 mm
Weight    20kg