ESP32-S3 sa 1.43 inča AMOLED touch ekranom, 466x466, QSPI, A

SKU: 30106
Part No. : ESP32-S3-Touch-AMOLED-1.43
Brand: Waveshare

Korisne informacije: www. waveshare. com/wiki/ESP32-S3-Touch-AMOLED-1.43

  ESP32-S3 1.43inch AMOLED Display Development Board, 466×466, QSPI Interface Round Display, Onboard Accelerometer And Gyroscope Sensor, RTC Chip, ESP32 With Display   ESP32-S3 1.43inch AMOLED Development Board  

466 × 466 Resolution, AMOLED Round Display, Onboard Multiple Interfaces

Product Features  

This product adopts ESP32-S3R8 chip with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.43inch AMOLED display which can smoothly run GUI programs such as LVGL. Onboard rich peripheral resources such as RTC chip, QMI8658 6-axis IMU, TF card slot, Lithium battery header, etc. , and reserved USB, UART, I2C and GPIO pin headers, offering strong compatibility and expandability. It is suitable for the quick development of the HMI and other ESP32-S3 applications.

• Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor
• Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 1.43inch AMOLED display, QSPI interface, 466 × 466 resolution, 16.7M color
• Supports capacitive touch function controlled via I2C interface, with interrupt support
• Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.
• Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
• Onboard RST button and programmable BOOT button for easy custom function development
• Onboard 3.7V MX1.25 Lithium battery recharge/discharge header
• Onboard TF card slot for external TF card storage of pictures or files
• Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
• Onboard UART and I2C SH1.0 4PIN connector, reserved 2 × 14PIN 1.27mm pitch headers, adapting multiple GPIO interfaces
• Optional for CNC metal case, with clear and colorful label on the back, nice looking and easy to carry

  AMOLED parameters   Display Panel AMOLED Display Size 1.43 inch Resolution 466×466 Display Colors 16.7M Brightness 350 cd/㎡ Contrast Ratio 60000:1 Communication Interface QSPI Driver IC SH8601/C05300 Touch Supported Touch IC FT3168

Adopts AMOLED screen  

The next-generation display technology, compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image

178° wide viewing angle  

Excellent Display Performance, 16.7M color, wide viewing angle

Supports ESP-IDF, Arduino IDE  

Comprehensive SDK, dev resources, tutorials to help you easily get started

Wi-Fi and BLE 5 support  

ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 ax/b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh

interface definition  

adapting multiple GPIO interfaces, offers strong compatibility and expandability

ESP32-S3 AMOLED definition AMOLED pin ESP32-S3 pin Description QSPI_CS GPIO9 QSPI chip selection QSPI_CLK GPIO10 QSPI clock pin QSPI_D0 GPIO11 QSPI D0 data QSPI_D1 GPIO12 QSPI D1 data QSPI_D2 GPIO13 QSPI D2 data QSPI_D3 GPIO14 QSPI D3 data AMOLED_RESET GPIO21 AMOLED reset pin AMOLED_EN GPIO42 AMOLED enable pin TP_SDA GPIO47 TP I2C data pin TP_SCL GPIO48 TP I2C clock pin

What’s On Board

1. ESP32-S3R8
2. 16MB Flash
3. QMI8658 attitude sensor
   6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
4. PCF85063
   RTC chip
5. 3.7V Lithium battery header
6. TF card slot
   on the back side of the PCB
7. RTC battery header
8. I2C 4PIN connector

1. Charge indicator
2. USB Type-C port
3. Power indicator
4. UART 4PIN connector
5. BOOT button
6. Reset button
7. IPEX1 connector
   Switching to use external antenna via resoldering a onboard resistor
8. Onboard ceramic antenna

Package content:

Weight:  0.037 kg

ESP32-S3-Touch-AMOLED-1.43

1. ESP32-S3-Touch-AMOLED-1.43 x1 no case
2. SH1.0 4PIN cable ~100mm x2

w30106

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.