ESP32-S3 sa 2.8 inča ekranom, 480x480, 32-bit LX7 Dual-core

SKU: 30254
Part No. : ESP32-S3-LCD-2.8C no touch
Brand: Waveshare

 

Korisne informacije: www. waveshare. com/wiki/ESP32-S3-LCD-2.8C

  ESP32-S3 2.8inch Round Display Development Board, 480×480, 32-bit LX7 Dual-core Processor, Supports WiFi &Bluetooth, no Touch Function, ESP32 With Display   ESP32-S3 2.8″ LCD Development Board  

480×480 resolution, multiple peripheral interfaces

 

Features  

This product is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.

• Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.81 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 2.8inch LCD display, 480×480 resolution
• Supports touch control via I2C interface, with interrupt support (for touch version only)
• Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
• Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
• Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

  Display parameters   Display Panel IPS Display Size 2.8 inch Resolution 480 × 480 Contrast Ratio 1200:1 Communication Interface RGB Driver IC ST7701        

 

IPS Display Panel  

Excellent display performance, 160° viewing angle

 

Supports ESP-IDF, Arduino IDE  

Comprehensive SDK, dev resources, and tutorials to help you easily get started

 

Supports multiple peripherals  

Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc.

 

What’s On Board

1. ESP32-S3R8
   Dual-core processor, up to 240MHz operating frequency
2. QST attitude sensor
   QMI8658 (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)
3. TCA9554PWR
   GPIO expander chip
4. FSUSB42UMX
   UART selection chip, the 4-pin UART header is disabled when connected to the UART Type-C port
5. CH343P
   USB to UART with onboard automatic download circuit, enabling program burning without additional operations
6. 16MB Flash
7. RTC chip
   PCF85063 RTC chip
8. Battery recharge manager
9. ME6217C33M5G
   Low dropout regulator, 800mA output (Max. )
10. USB Type-C port
11. MX1.25 battery header
    MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging

1. 12PIN multi-functional pin header
2. IPEX1 connector
   Switching to use external antenna via resoldering the resistor
3. TF card slot
4. RTC battery header
   for connecting rechargeable RTC battery
5. I2C header
   connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions
6. UART header
   only available when the USB to UART Type-C port is not connected
7. USB TO UART Type-C port
   for power supply, program burning and debugging
8. Buzzer
9. Charge indicator
   Lithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected)
10. Power indicator
11. Battery power supply control button
12. RESET button
13. BOOT button

Package content:

Weight:  0.06 kg

ESP32-S3-LCD-2.8C

1. ESP32-S3-LCD-2.8C x1
2. SH1.0 12PIN cable ~100mm ×1
3. SH1.0 4PIN cable ~100mm (2pcs) ×1

w30254

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.