ESP32-S3 sa 2.8 inča touch ekranom, 480640, IPS, 32-bit LX7

SKU: 30103
Part No. : ESP32-S3-Touch-LCD-2.8B
Brand: Waveshare

Korisne informacije: www. waveshare. com/wiki/ESP32-S3-Touch-LCD-2.8B

  ESP32-S3 2.8inch Display Development Board Type B, 480×640, IPS, 32-bit LX7 Dual-core Processor, Up To 240MHz Frequency, Supports WiFi &Bluetooth, ESP32 With Display   ESP32-S3-Touch-LCD-2.8B  

Integrates 480 × 640 RGB interface display, onboard multiple peripheral interfaces

Features  

This product is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch LCD display (optional for touch function) can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.

• Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 2.8inch LCD display, 480×640 resolution
• Supports touch control via I2C interface, with interrupt support (for touch version only)
• Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
• Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
• Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

  LCD parameters   Display Panel IPS LCD Display Size 2.8 inch Resolution 480 × 640 Display Colors 65K Communication Interface SPI + RGB Driver IC ST7701 Touch Supported (Touch Version Only) Touch IC GT911 (Touch Version Only)

IPS Display Panel  

Excellent display performance, wide viewing angle

Supports ESP-IDF, Arduino IDE  

Comprehensive SDK, dev resources, and tutorials to help you easily get started

Supports multiple peripherals  

Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc.

What’s On Board

1. ESP32-S3R8
   Dual-core processor, up to 240MHz operating frequency
2. 16MB Flash
3. QST attitude sensor
   QMI8658 (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)
4. Onboard ceramic antenna
5. TCA9554PWR
   GPIO expander chip
6. RTC chip
   PCF85063 RTC chip
7. MP1605GTF-Z
   Power module, 2A current (MAX)
8. Battery recharge manager
9. Buzzer
10. TF card slot
    on the back side of the PCB
11. BOOT button
12. RESET button

1. IPEX1 connector
   Switching to use external antenna via resoldering the resistor
2. 2*12PIN 2.54mm pin header
3. RTC battery header
   for connecting rechargeable RTC battery
4. MX1.25 battery header
   MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging
5. UART header
6. Charge indicator
7. USB Type-C port
8. Power indicator
9. I2C header
   connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions
10. Battery power supply control button

Package content:   Weight:  0.09 kg ESP32-S3-Touch-LCD-2.8B

1. ESP32-S3-Touch-LCD-2.8B x1
2. SH1.0 4PIN cable ~100mm x2

w30103

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.