ESP32-S3 sa 7 inča ekranom, 800x480, 32-bit LX7 Dual-core

SKU: 30406
Part No. : ESP32-S3-LCD-7 no touch
Brand: Waveshare

 

Korisne informacije: www. waveshare. com/wiki/ESP32-S3-Touch-LCD-7

  ESP32-S3 7inch Display Development Board, ESP32 With Display, 800×480, no Touch Function, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi &Bluetooth, With Onboard Antenna   ESP32-S3 7″ LCD Development Board  

Integrates RGB interface LCD

 

Features  

This product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 7inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications

• Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
• Onboard 7inch LCD display, 800×480 resolution, 65K color
• Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
• Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios

IPS Display Panel  

Excellent display performance, 170° viewing angle

 

Supports multiple peripherals  

Supports the expansion of multiple peripherals via Sensor, CAN, RS485, and I2C interfaces

 

What’s On Board

1. ESP32-S3N8R8
   The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash
2. 7inch display panel connector
3. N/A
4. TF card slot
5. USB Type-C port
6. UART1 Port
   USB TO UART Type-C port
7. UART2 connector
   UART1 and UART2 are the same UART, selected by switch
8. Sensor header
9. CAN header
10. I2C header
11. RS485 header

1. 3.7V single lithium battery PH2.0 header
2. CAN terminal resistor selection
3. RS485 terminal resistor selection
4. UART selection
   select UART1 or UART2
5. BOOT button
   Press and hold while powering on for program burning
6. RESET button
7. I2C level selection
   3.3V / 5V
8. DONE
   Lithium battery charging completed indicator
9. CHG
   Lithium battery charging indicator
10. PWR
    Power supply indicator

Package content:

Weight:  0.291 kg

ESP32-S3-LCD-7

1. ESP32-S3-LCD-7 x1
2. HY2.0 2P to 2PIN male cable 10cm ×2
3. HY2.0 3P to 3PIN male cable 10cm ×1
4. HY2.0 4P to 4PIN male cable 10cm ×2
5. Screws pack x1

w30406

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.