Raspberry Pi Pico 2 W komplet/kit osnovni

SKU: 29448
Part No. : Raspberry-Pi-Pico-2-W-Basic-Kit

 

Korisne informacije: www. waveshare. com/wiki/Raspberry_Pi_Pico_2_W

  Raspberry Pi Pico 2 W Microcontroller Board, Based on Official RP2350 Chip, Dual-core &Dual-architecture Design, Supports WIFI and Bluetooth, Various Development Kit Options   Raspberry Pi Pico 2 W  

The next big tiny thing

Built Using RP2350 Microcontroller Chip Designed By Raspberry Pi

Board specifications  

Raspberry Pi Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.

Key features include:

• RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
• Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2
• 520KB of SRAM, and 4MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Temperature sensor
• 12 × Programmable I/O (PIO) state machines for custom peripheral support

Pico Comparison   Model Pico 2 W Pico 2 Pico W Pico processor Dual-core ARM Cortex-M33
or dual-core Hazard3 RISC-V
@150MHz Dual-core ARM Cortex-M0+
@133MHz SRAM 520KB 264KB Flash 4MB 2MB WIFI 2.4GHz 802.11n WIFI 4 – 2.4GHz 802.11n WIFI 4 – Bluetooth Bluetooth 5.2 – Bluetooth 5.2 – Security Signed boot support, OTP storage for boot decryption key, and hardware SHA-256 accelerator, etc. – Peripherals 2 × UART
2 × SPI
2 × I2C
3 × ADC
1 × USB 1.1 and PHY
16 × PWM 12 × PIO state machines 8 × PIO state machines 1 × HSTX – GPIO pins 26

 

Pico 2 W Basic Kit

On the basis of the starter kit, this kit includes LCD1602 RGB Module, PIR motion sensor, RGB LED, alarm, single-joint potentiometer, and 5mm LED, etc. With the official tutorial, you can quickly get started with MicroPython programming.

C/C++, MicroPython support  

Comprehensive SDK, dev resources, tutorials to help you easily get started

Dual-core, dual-architecture  

The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment

WIFI and Bluetooth Support  

Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2

26 × multi-function GPIO pins  

configurable pin function, allows flexible development and integration

 

Package content:

Raspberry-Pi-Pico-2-W-Basic-Kit

1. Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
2. Experimental board + jumper wires x1
3. USB-A to micro USB cable ~1.2m x1
4. PIR sensor 2PCS x1
5. Single-joint potentiometer x1
6. 8-Bit WS2812 RGB LED x1
7. Round-shape button 3PCS x1
8. Alarm x1
9. 330R resistor 10PCS x1
10. 5mm LED 6PCS x1
11. LCD1602 RGB Module x1
12. Jumper wire 2.54mm pitch male-male 10PIN ~200mm x1
13. Jumper wire 2.54mm pitch female-female 10PIN ~200mm x1
14. Jumper wire 2.54mm pitch male-female 10PIN ~200mm x1
15. Plastic storage box x1
16. Acrylic protective case (top and bottom) x1

w29448

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.