Strujna klešta ORIGINAL Tektronix A6303 100A AC DC Current P

BEZ PORUKA - SAMO POZIV


Strujna klešta ORIGINAL Tektronix A6303 DC-15 MHz 100 A AC/DC Current Probe

ORIGINALNO, provereno ispravno, u odličnom stanju, čisto


Tektronix A6303 Current Probe, AC/DC, 100 A, DC-15 MHz

The A6303 current probe is useful in making SCR, power supply, industrial control, and motor start-up current measurements. It requires an AM503 series current probe amplifier for operation.

Features:

• AC/DC Current measurements
• Input current: 100 A continuous, 500 A peak
• Bandwidth: dc to 15 MHz
• Clips on conductors up to 21.1 mm diameter
• Cable length: 2 m

Applications

• Motor Drives
• Satellite Systems
• Inverters
• Transportation Systems
• Power Supplies
• Avionics

AM503 Family Current Probes - A6312, A6302, A6302XL, A6303, A6303XL, A604XL, CT4

A total of six current probes are available for use with the AM503B and AM5030 Current Probe Amplifiers. Since all six probes are of the split-core mechanical design, they easily clip on and off of a conductor. All the probes provide simultaneous DC and AC current measurements with a wide range of current amplitude and bandwidth capabilities.

The AM503 Current Probes convert the DC and AC flux field of a conductor to a voltage signal which is sent to an AM503B or AM5030 Amplifier. The probes include both a Hall Effect device, which senses the DC current, and a ferrite transformer which senses the AC current. The probes also utilize a bucking current from the Amplifier, which eliminates core saturation. The bucking current is 20 A for the A6302XL, 100 A for the A6303XL, and 500 A for the A6304XL.
A6312, A6302, and A6303 Current Probes

The A6312, A6302, and A6303 offer a wide range of current measurement capability for the lab and bench environment. The A6312 covers frequencies from DC to 100 MHz while the A6302 covers DC to 50 MHz. Both clip onto conductors up to 3.81 mm (0.15 in. ) and measure continuous currents up to 20 A and peak currents up to 50 A as long as they do not exceed the amp*second product of 100 A*μ s.

The larger A6303 measures higher amplitude, lower frequency currents. It clips onto conductors up to 21.1 mm (0.83 in. ) in diameter. Its frequency range is DC to 15 MHz. It will measure continuous currents up to 100 A and peak currents up to 500 A, as long as the amp*second product of 10,000 A*μ s is not exceeded.

The A6302 and A6303 are also compatible with the 11A16 2-CH Current Probe Amplifier for the 11000 and DSA Series oscilloscopes. With the 11A16, the A6302 is rated for 10.5 A, and the A6303 for 52.5 A.

Note: The A6312, A6302XL, A6303XL, and the A6304XL are not compatible with the 11A16.