USB na CAN adapter

USB na CAN adapter, dvokanalni CAN analizator, industrijska izolacija

SKU: 22773
Part Number: USB-CAN-B
Brand: Waveshare

USB To CAN Adapter, Dual-Channel CAN Analyzer, Industrial Isolation
USB To CAN Adapter
USB To CAN

CAN Interface Card

CAN Bus Analyzer

Features At A Glance

USB-CAN-B is an industrial high-performance USB to CAN adapter, CAN-bus communication interface card and CAN protocol data analyzer. Integrating dual independent channels with electrical isolation and multiple protection circuits. Supports Windows and Linux systems, comes with drivers, CANTools related software, secondary development examples and tutorials. It can be connected to the PC or industrial control host via USB port to realize transceiver control, data analysis, collection and monitoring of CAN bus network. Compact in size and easy to use, which can be used for learning and debugging of CAN bus, and secondary developmentand integration into various industrial, power communication and intelligent control applications that require CAN bus communication.

Specifications

PRODUCT TYPE

     Industrial grade: USB to CAN interface converter/CAN-bus communication interface               card/CAN protocol data analyzer

USB

Operating voltage

     5V (directly powered by USB port without external power supply)
Connector

     USB-B
Protection    

     Power and signal fully isolation, 2500V DC isolation, ±8KV electrostatic discharge

CAN INTERFACE

CAN channel    

     Dual-channel: CAN1 and CAN2 (independent and isolated)

Connector    

     CAN bus screw terminal

Protection

     Built-in GDT Ceramic discharge tube, can effectively release surge current
     Built-in EPCOS Common mode Choke, can improve anti-interference ability
     Built-in power and signal isolation module, 2500V DC isolation, ±8KV electrostatic                 discharge

Terminal resistor

     Each CAN channel has two built-in 120Ω terminal resistors, which can be enabled by             switch

Baud Rate

     10Kbps~1Mbps

Protocol Support

     CAN2.0A, CAN2.0B, CANOpen, SAE J1939, DeviceNet, iCAN, ISO 15765 protocol

Hardware Support

     Single-wire CAN, High-speed CAN, Low-speed/Fault-tolerant CAN

Transfer speed  

     The receiving and sending of each CAN channel can reach: 8500 frames/s

Transmit buffer

     2000 frames receiving buffer and 1000 frames sending buffer per channel (automatically       retransmit when transmission fails)

INDICATORS

PWR    

     Red power indicator, light up when there is USB connection and voltage is detected

TXD    

     Green TX indicator, light up when the USB port sends data

RXD    

     Blue RX indicator, light up when the device ports send data back

CASE MATERIAL

Aluminum alloy case + 3D flame-retardant insulating sheets on both sides

DIMENSIONS

104 x 70 x 25 mm

OPERATING TEMPERATURE    

-40~85℃

SYSTEM SUPPORT

Windows    

     Windows XP/7/8/10/11 (32/64 bits)

Linux    

     Raspberry Pi OS, Ubuntu (Jetson Nano), VMware virtual PC and so on.

Wiki: www. waveshare. com/wiki/USB-CAN-B

PACKAGE CONTENT

Weight: 0.389 kg

USB-CAN-B x1
Car OBD adapter x2
USB type A plug to type B plug cable x1
4pin cable x1
Screwdriver x1

w22773

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.