USB To UART/I2C/SPI/JTAG Converter

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V

N0V0

SKU:  25411
Part Number:  USB TO UART/I2C/SPI/JTAG
Brand:  Waveshare

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible With 3.3V And 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-Mount &Rail-Mount Support USB TO UART/I2C/SPI/JTAG

Supports Multiple Interfaces  |  Compatible With 3.3V And 5V

  Features At A Glance  

• Supports USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG
• Supports 2-ch high-speed UART interfaces, up to 9Mbps baud rate, with CTS and RTS hardware automatic flow control
• Supports 1-ch I2C interface, for easy operating EEPROM through the host computer or programming I2C devices such as OLED and sensor
• Supports 1-ch SPI interface, with 2x chip select signal pins, capable of controlling 2-ch SPI slave devices at different times
• Supports 1-ch JTAG interface, can be used with OpenOCD for debugging and testing (Due to the limited testing of chips and software functions, users need to evaluate and test this function on their own)
• Onboard 3.3V and 5V level conversion circuit for switching the operating level of the communication interface, better compatibility
• Onboard resettable fuse and ESD protection circuit, provides over-current/over-voltage proof, safe and stable communication
• Aluminium alloy case with oxidation dull-polish surface, CNC process opening, solid and durable, well-crafted
• High-quality USB-B and DC connectors, smooth plug &pull, durable and reliable, with anti-reverse protection

Specifications

HOST INTERFACE

USB

POWER SUPPLY

USB port, 5V

OPERATING LEVEL

3.3V/5V (select via onboard switch)

USB

Connector USB-B

Interface protection Resettable fuse, ESD protection

UART

Channel 2 (the red DIP switch needs to be set to M0 mode)

Connector 6PIN IDC connector

Baud rate 1200bps～9 Mbps

Hardware flow control CTS and RTS

I2C

Channel 1 (the red DIP switch needs to be set to M1/M2 mode)

Connector 12PIN IDC connector (the first 4 pins are I2C)

SPI

Channel 1 (the red DIP switch needs to be set to M1/M2 mode)

Connector 12PIN IDC connector (the last 8 pins are SPI)

JTAG

Channel 1 (the red DIP switch needs to be set to M3 mode)

Connector 12PIN IDC connector (the last 8 pins are JTAG)

DIMENSIONS

86.0×48.0×27.6mm

Primary Function

Easy To Control And Debug Various Interface Devices Via PC, Supports USB To 2-Ch UART, Or USB To 1-Ch UART + 1-Ch I2C + 1-Ch SPI, Or USB To 1-Ch UART + 1-Ch JTAG

Multi System Support

Supports Win7/8/8.1/10/11, Linux, Etc.

Application Environments

Suitable For College Students, Technical Engineers, Electronic Enthusiasts, Or DIY Makers For Learning And Debugging

  Supports Various Interfaces
Supports multiple communication debugging interfaces, most of which can be used at the same time

Small and compact, easy to install
Flexible installation, suitable for various devices

Reserved screw holes
Easy to mount, industrial metal case, rugged &durable

WIKI:  www. waveshare. com/wiki/USB_TO_RS232/485/422/TTL

PACKAGE CONTENT

Weight:  0.17 kg

1. USB TO UART/I2C/SPI/JTAG                                     x1
2. USB type A to type B cable ~1.2m                           x1
3. 12PIN cable ~20cm                                                 x1
4. 6PIN cable ~20cm (2PCS)                                        x1

w25411

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.