HiFiBerry DAC2 Pro

This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering.

Our HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro. It comes with integrated dual-domain low-jitter clocks and gold-plated RCA connectors. It features and on-board headphone amplifier and can be upgraded with the DSP add-on module.
It can be simply plugged onto your Raspberry Pi, without any soldering.

OVERVIEW

The HiFiBerry DAC2 Pro is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimised for one specific use case: affordable high-quality audio playback.

FACTS

• Stereo output
• Integrated headphone amplifier
• can be equipped with an additional Digital Signal Processor (DSP) for flexible audio processing
• Dedicated 192kHz/24bit high-quality Burr-Brown DAC
• Hardware volume control for DAC. You can control the input and output parameters using “ alsamixer” or any application that supports ALSA mixer controls.
• Connects directly to the Raspberry Pi, no additional cables needed
• No soldering, comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi, it is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
• Compatible with all Raspberry Pi models with a 40-pin GPIO connector
• Directly powered from the Raspberry Pi, no additional power supply
• Two ultra-low-noise linear voltage regulators for optimal audio performance
• Low-jitter dual-domain clock for optimised clock decoupling from the Raspberry Pi
• HAT compliant, EEPROM for automatic configuration
• Gold plated RCA output connectors
• Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi
• Audio connector to connect analog audio amplifier

Hardware

1.  Burr-Brown DAC
2.  Low-jitter clock circuit
3.  Headphone amplifie


Specifications

Maximum output voltage:  2.1Vrms
DAC signal-to-noise ratio:  112db            Typical 
DAC THD+N:  -93db                                  Typical
Frequency response:  10Hz-70kHz           -3db
Power consumption:  <0.3W
Sample rates:  44.1-192kHz


Configuration

Overlay for config. txt:
dtoverlay=hifiberry-dacplus


Media

Additional Documentation

• Updating the Linux kernel
• 3D model (step)

4260439550767

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.