Moog Minitaur Synthesizer

▇ ▅ ▇ █ ▇ █
A   R   T   I   S   T   Sistems d. o. o.


Moog MINITAUR analogni synth modul je vrhunski bas modul u kompaktnom kućištu dizajniran kao idealan za svirke uživo. Mogućnost kontrolisanja putem MIDI, CV ili USB interfejsa!

Front Panel Controls:

• VCO2 Frequency – Sets the frequency offset of VCO2 from VCO1 from -1 Octave to +1 Octave. Center is unison with VCO1.

• Oscillator 1 &2 Saw/Square Waveform Selector – Selects a Sawtooth wave (LED OFF) or Square wave (LED ON) Signal for VCO1 and 2.  

• VCO1 Level – Sets the level of VCO1

• VCO2 Level – Sets the level of VCO2

• VCF Cutoff – Sets the Cutoff Frequency of the 4-pole Moog Lowpass VCF from 20Hz to 20KHz 

• VCF Resonance – This sets the gain for the amount of signal from the output of the VCF fed back to the input of the VCF. This creates a peak in Frequency response at the Cutoff Frequency that can be increased all the way to self-oscillation.

• VCF EG Amount – Bi-polar control sets the (+) or (-) Amount of Envelope Generator modulation of the VCF. Center is no Envelope Generator modulation.

• LFO Rate – Sets the frequency of the LFO. Range is from 0.01Hz to 100Hz

• LFO VCO Amount – Sets the Amount that the LFO modulates the VCO

• LFO VCF Amount – Sets the Amount that the LFO modulates VCF

• VCA EG Attack – Sets the attack Time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 msec to 30 seconds.

• VCA EG Decay/Release – Sets both the decay time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 msec to 30 seconds. The Release segment of the EG is enabled by the Release On/Off switch.

• VCA EG Sustain – Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA.

• VCF EG Attack – Sets the attack Time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 msec to 30 seconds.

• VCF EG Decay/Release – Sets both the decay Time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 msec to 30 seconds. The Release segment of the EG is enabled by the Release On/Off switch.

• VCF EG Sustain – Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF.

• Release On/Off Switch – Enables (LED On_ or Disables (LED Off) the Release segments of both Envelope Generators.

• Glide On/Off Switch – Enables/ Disables the Glide function

• Glide – Sets the rate of Glide when the note controlling the MINITAUR changes.

• Volume – The Master Volume of the MINITAUR’s synth Engine.

• Fine Tune – Adjusts the frequency of the VCOs +/- 1 semitone.

• MIDI Indicator LED – Indicates incoming MIDI activity

• LFO Rate Indicator LED – Indicates the rate of the LFO.

Back Panel:

• Audio Out – 1/4" Unbalanced jack.

• Headphones -- Jack for stereo headphone output.

• Audio In – 1/4" Unbalanced jack accepts   line-level input.

Analog CV Inputs:

• Pitch CV – 1/4" TRS Jack accepts 0 to +5V signal (internally processed for 1 V/Octave) via passive Expression Pedals or CVs.

• Filter CV – 1/4" TRS Jack accepts 0 to +5Vsignal via passive Expression Pedals or CVs.

• Volume CV – 1/4" TRS Jack accepts 0 to +5Vsignal via passive Expression Pedals or CVs.

• Gate – 1/4" Jack accepts a 0 (Off)/ +5V(On) Gate signal to trigger the unit’s EGs.

MIDI:
• MIDI (DIN) – Standard DIN MIDI input for MIDI Control of the MINITAUR

• MIDI (USB) – Type B USB connector for connecting MINITAUR to host for USB MIDI.   

• ( „ “ ) -

• Trudimo se da sve cene držimo aktuelnim na svakodnevnom nivou, greške su moguće. Cena na KP je informativnog karaktera, informaciju o ceni proverite u našim radnjama.

• Plaćanje u našim maloprodajnim objektima vrši se isključivo u DINARIMA. Cena napisana u evrima je informativnog karaktera.

• Ukoliko vidite bilo gde bolju cenu za nov proizvod, kontaktirajte nas i mi ćemo se potruditi da napravimo najbolju ponudu za Vas.

Hvala na razumevanju.

Vaš AudioPro Artist

Kontakt:

● AudioPro ARTIST Sistems d. o. o. ●

BEOGRAD
Bulevar Milutina Milankovića 98-100
Novi Beograd 
tel : 011/ 344-28-74

NOVI SAD
Maksima Gorkog 16
tel: 021/ 300-69-11

NE PRIHVATAMO ZAMENE!