> Step up/down sa LCD instrumentom 50V 5A - DPH5005 <

Modul predvidjen za pravljenje stabilisanog ispravljaca sa naponom od 0-50V i strujom od 0-5A u koracima od 0.01A.
Varijanta kojoj moze na ulaz da se dovede visi ali i nizi napon od zeljenog na izlazu tako da moze da se iskoristi snazniji ispravljac nizeg napona a da se dobije pun raspon izlaznog napona.

Sve funkcije se podesavaju pomocu tastera i dugmeta rotacionog enkodera a svi parametri se vide na visebojnom LCD displeju.
Na poslednjoj slici se vide razliciti primeri ugradnje.

General Information

   The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-50.00V,  step by 0.01V.  Its adjustable output current range is 0-5.000A,  step by 0.001A. This module has power-down stored function and can store 10 groups preset value. And it also has the function of extracting quickly two groups stored value. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required.  LCD display on the module has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc. on the output state remind area, you can see that output opens or not, the state of constant voltage and constant current, output is normal or not, the key is locked or not, and the current data groups that is being used. On the setting data interface, you can adjust overvoltage value, overcurrent value, over-power value, data set and LCD brightness. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.

Technical parameters

Input voltage range:   6.00-50.00V                                
Output voltage range:   0V-50.00V
Output current:  0-5.000A                                                      
Output power range: 0-250W
Product Weight: about 222g                                              
Display module size: 79*43*41(mm) (L*W*H)
Open size:   71mm*39mm                                                  
Power module size: 93*71*41(mm) (L*W*H)
Length of connecting line: 200mm                                  
Fixed hole center distance: 86mm, 64mm
Output voltage resolution: 0.01V                                        
Output current resolution: 0.001A 
Output Voltage accuracy: ± (0.5% + 2 digits)                  
Output Current accuracy: ± (0.5% + 3 digits)
Max allowable input current: 10A                                      
Output ripple: 100mVpp

NOTE:

1,  when you get the product in the first time, please don't use your hands to touch the components, because human static electricity can damage some chips.

2. If you want to ensure output at full load, you must make sure that input is higher than 28V and 280W; pay attention to heat elimination at full load.

3. When the current is more than 3.2A or the temperature is more than 45 ° c , the fan will begin to work. when the temperature is more than 65° c, the module will stop working