Vlagomer za drvo
Vlagomer MT10 meri procenat vlage u drvetu(ogrevnom i tehničkom), papiru, kartonu i građevinskom materijalu(malter, beton, gips i. t. d. )
Opseg merenja drvo:8-60% građevinski materijal 0,3-2%.
LCD ekran tri boje zelena-suvo žuta-povećano crvena-preterano, sa pozadinskim osvetljenjem za uslove slabe vidljivosti.
Pokazatelj slabih baterija, automatsko isključivanje radi uštede u potrošnji baterija.
Introduction:
The MT-10 is a pin moisture meter that is made for direct insertion into materials in order to measure the amount of moisture present within the material. The sharp pins are made to make insertion as simple as possible and values are relayed via the LCD screen on the front of the tester.
Feature:
Wood Species Group Table
Wood Group
Wood Species
A
Teak, Walnut, Afrormosia,
B
Keruing, White Poplar,
C
Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry
D
Basswood, Larch, Pine, Birch
*Model: MT10
*Checks for moisture content in wood, paper or cardboard and buildings materials such as sheetrock, concrete, mortar, plaster etc
*Measurement ranges: wood/paper 8 to 60% and building material from 0.3 to 2.0%
*Temperature range from 0 to 40° C (32 to 99° F)
*Ideal for use in indoor air quality applications for detecting moisture content in the walls, floors and ceilings stimulating mould growth
*LCD display provides moisture or temperature measurements
*Three colour LED provides quick moisture indication:
*Green - air dry
*Yellow - increased moisture
*Red - excessive moisture
*Backlit screen for use in poor lighting conditions
*Low battery indication
*Auto shut down when left idle in order to conserve the battery life
Uputsvo na engleskom, troškovi kurira kupac.
U skladu sa Pravilima i uslovima korišćenja i Polisom o poštovanju privatnosti, KupujemProdajem koristi Cookie-je da bi obezbedio dobro korisničko iskustvo, prikazivanje personalizovanog sadržaja, prikazivanje reklama, kao i druge funkcionalnosti i usluge koje ne bismo mogli da obezbedimo bez Cookie-ja.