JBL Selenium D405Ti 8ohm

Potpuno novo, neotpakovano.

Prečnik spulne 4", prečnik otvora za hornu 2".

Cena iz oglasa je po komadu.

The Selenium D405Ti driver has a 2" exit throat and a pure titanium diaphragm with a superior structural design. This driver features a frequency response of 400- 18,000 Hz, a 100mm voice coil, and 125 watts RMS. A bolt-on system makes connecting the horn a breeze.

The D405Ti is a 2" exit compression driver for high sensitivity, low distortion and smooth extended frequency response applications. Its pure titanium diaphragm was especially designed based on the extremely light and structurally strong snowflake crystal. This leads the D405Ti driver to deliver high performance, high quality and high value for the pinnacle in sound reinforcement applications. It combines a stable structure for mid-frequency reproduction and a low mass that enables high frequency reproduction virtually linear to 18 kHz. Its features a ferrofluid (Ferrosound® ) loaded gap reducing heat build-up and offering consistent results over long-term demanding concert usage. An injected phase plug optimizes undesirable phase cancellations and the magnetic assembly is optimized by using FEA (Finite Element Analysis). The voice coil is made of high temperature wire wound on Kapton® former to withstand high operating temperatures. A precisely engineered diaphragm structure and alignment mechanism allows for easy, reliable and cost effective repair in case of diaphragm failure. The D405Ti connects to a horn by using a bolt system.

SPECIFICATIONS:

Power Handling: 125 watts RMS/250 watts max

Nominal Impedance: 8 ohms

Voice Coil Diameter: 100mm

Frequency Response: 400-18,000 Hz

SPL: 111 (Horn)/ 113 (Plane-Wave Tube) dB 2.83V/1m

DC Resistance: 6.0 ohms

Voice Coil Winding Length: 4.5 meters

Voice Coil Winding Depth: 3.0mm

Diaphragm Material: Titanium

Flux Density: 1.7 T

Volume Displaced by Tweeter: 2.2 I

Throat Diameter: 50mm

Minimum Recommended Crossover: 800 Hz

Magnet Weight: 2640g

Net Weight: 8420g

Connectors: Push Terminals

Horn Connection: Bolt-on

Depth: 86mm

Magnet Diameter: 200mm

Magnet Height: 24mm