Tester akumulatora za kola KONNWEI KW208 

Tester olovnih akumulatora.
Jednostavan za upotrebu.

      MOZETE TACNO DA UTVRDITE :

1. U KAKVOM JE STANJU AKUMULATOR,

2. SISTEM PRAZNJENJA AKUMULATORA PRILIKOM STARTOVANJA VOZILA ,  

3. PRAVILNOST PUNJENJA AKUMULATORA TOKOM RADA.

Pozovite na 0640011727 da bih vam detaljno objasnio sve o uredjaju.

https: //youtu. be/uLLlcNYzk8o

OPIS;

Car Battery Tester 12V 100 To 2000CCA Cranking Charging Circut Tester Battery Analyzer 12 Volts Portable Detection Battery Tools

 

Features:

1. [Multi-function]: KONNWEI KW208 battery tester includes battery test, startup test, charging test functions. Mainly for analyzing battery health status. It directly detects whether the battery is good or bad, and proposes a solution.

2. 【Convenient】: No built-in battery is needed, it is powered directly from 12V battery. And can be tested by connecting electrodes.

3. [Professional]: Test standards include most of the world's battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE

4. 【Efficiency and Safety】: Using advanced conductive technology, it can directly display high-precision results of vehicle information. Designed with reverse polarity protection. It won't damage the device or affect the car or battery.

5. 【Multi-language support】: 8 languages are available. Available in English, German, French, Dutch, Russian, Spanish, Italian, Portuguese.

6. 【Accurate Measurements】This professional car battery tester provides accurate results, calculates the cold start ability and aging degree of the battery, and makes car repairs faster and more accurate.

7. 【Wide Compatible】Beginners or experts, this car battery diagnostic tester can be used with a variety of 12V 100-2000 CCA regular flooded batteries, AGM flat, AGM spiral as well as GEL batteries.

8. 【Additional function】KW208 car battery tester displays test results in text form and displays real-time battery voltage. 2.4-inch smart backlight, STM32 main chip, easy and fast to read and access!

 

Function:

1. . Test result is good, charge or replace

2. Capacity Cold Cranking Ampere (CCA), DIN, EN and IEC information pertains to battery rating. Internal resistance (mΩ ) and life percentage (%)

3. Start the system and charge the system

4. Record and playback battery data.

5. Additional functions such as battery test, startup test, charging test, etc.

6. Supports major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, DIN and IEC

 

Installation method:


Step 1. Connect the 12V battery, the red clip is connected to the positive pole, and the black clip is connected to the negative pole.

Step 2. Battery Test: First select the battery type to be tested, then select the test standard and test range, then you can get the result in seconds.

Step 3. Start test: After selecting the start test function, follow the prompts to start the engine. Finished test.

Step 4. Charging test: After entering the charging test function, follow the prompts to increase the speed to 2500 rpm for 5 seconds, then press OK. Finished test.

 

Measurement standard:

1. CCA: 100-2000

2. BCI: 100-2000

3. CA: 100-2000

4. MCA: 100-2000

5. JIS:26A17-24SH52

6. DIN:100-1400

7. IEC: 100-1400

8. EN:100-2000

9. SAE: 100-2000

 

Product parameters:

Model: KW208

Material: ABS+rubber

Colour: Black

Battery Specification: 8V~16V

Working temperature: -10--+60 (℃)

Voltage: 12 (V)

Product size: 14*8.3*2.1cm

Net weight: 236g

Suitable for car factories, garages, car battery manufacturers, DIY enthusiasts, etc.

Packing list: Detector*1+Instruction Manual*1+Storage Box*1