Cost-effective and energy-saving compact heat pump for smaller above-ground pools. It can be easily put into operation above 15 ° C (Plug &Play) and the heating can be started on its simple user interface. The supply cable is equipped with an FI relay and has double protection.
- Mini heat pump for above ground pools
- Filled with ozone-friendly R32 gas
- Corrosion and UV resistant cover
- Effective and economical solution to extend the swimming season of the pool
- Must be installed in an outdoor, ventilated place
- Easy to install, no bypass required
- 32 and 38 mm can also be connected with diameter hoses
- Heat exchanger material: PVC housing, titanium pipe system
Technical data
- Minimum and maximum operating temperature: + 15 ° C and + 42 ° C
- Recommended minimum water flow: 2 m³ / h
- Fan speed: 1100 rpm
- Voltage: 220240V ~ 50Hz
- Current consumption: 2.6A
- Fuse current: 7.5A
- Noise level: 57 dB (A) 1m
- Noise level: 48 dB (A) 10m
- Protection: IPX4
- Dimensions: 43.4 x 43.2 x 46 cm
- Net weight: 25kg
- Boxed weight: 26kg
at 28C° air, 28C° water and 80% humidity
- COP value: 4.2
- Absorbed power: 1000W (1KW)
- Output power: 4200W (4.2KW)
- The output is realistic for a maximum water volume of 30m³ !
At 15C° air, 26C° water and 70% humidity
- COP value: 3.5
- Absorbed power: 910W (0.92KW)
- Output power: 3200W (3.2KW)
- Output power is realistic for 15-20m³ water volume!
U skladu sa Pravilima i uslovima korišćenja i Polisom o poštovanju privatnosti, KupujemProdajem koristi Cookie-je da bi obezbedio dobro korisničko iskustvo, prikazivanje personalizovanog sadržaja, prikazivanje reklama, kao i druge funkcionalnosti i usluge koje ne bismo mogli da obezbedimo bez Cookie-ja.