Napon punjenja: 12.6V-13V
Descriptions:
Balanced version: suitable for starting current below 80A, power 135W below the drill. (with balance)
3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 41 * 55 * 3.4mm (Standard Version / Enhanced Version), 41 * 60 * 3.4mm (Balanced version)
Product weight: 8.8g (standard / enhanced version), 9.8g (balanced version)
Charging voltage: 12.6V – 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Note 1: The successful start of the drill requires three 15C-20C power battery,
or six 10C-15C power battery (ordinary 18650 can not start the drill! ! ).
Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, do not deliberately short circuit.
Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor
(withstand voltage above 25V, capacity 10uF-100uF) to the motor’s positive
and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4: 3 groups of batteries in series, please ensure that the voltage of each group of batteries,
if not the same, please fill each battery separately and then use in series.
The The Discharge test, the voltage drop faster battery that group is poor battery.
Važna napomena:
Testiram pre slanja i nema šanse da pošaljem neispravn BMS tako da ne primam nikakav oblik reklamacije: da je stigao neispravan, da vam je crkao itd. . . niti prava na negativnu ocenu. Ako vam ovi uslovi ne odgovaraju odmah odustanite od kupovine.
**********************************************************************************************************************
Pogledajte i ostale moje oglase, svi predmeti koji imaju cenu su na lageru i odmah DOSTUPNI ! ! !