Digitalni multimetar UNI-T UT71D

The UT71 series includes state-of-the-art intelligent, medium-sized handheld multimeters with automatic and manual range switching and a main display display range of ± 20,000 or 40,000 and two additional auxiliary displays. The devices belong to the upper middle class, excel in quality design and reliability and are also suitable for industrial use. The UT71 series can quickly solve complex problems in electronics, factory automation, distribution and electronic engineering equipment. The UT71 series allows you to set upper and lower measurement limits, which is a very useful feature to improve the control of mass electronics production and screening efficiency. They allow measurement of AC / DC voltage and currents, resistance, diode test, continuity test, measurement of capacitance, frequency, temperature, current loop 4-20mA (except UT71A) and power input (for UT71E). The devices allow data storage and connection via USB with optical separation or via Bluetooth adapter UT-D07A, which must be purchased separately. You can pair your device with mobile phones or tablets by downloading the appropriate software from the Apple Store or Google Play Store. The information on the display is dark on a light background. Protection of current ranges is performed by tubular fuses (range 10A with fuse F 10A / 250V (ø5 x 20mm); range mA / µ A with fuse F 500mA / 250V (ø5 x 20mm)). The multimeter is powered by a 9V battery (6F22). The measuring range of quantities can be selected automatically or manually. The package includes measuring cables with spikes, as well as batteries.

UT71D is a top digital multimeter TRMS, which will find use in control in electronic production, in factory automation and in the distribution of electricity. energy. We provide an extended 3-year warranty for this product.

Product parameters :

– fully complies with IEC / EN611010, and has double insulation
– included in the CAT category. III 1000V – internal el. installation including three-phase distribution
– included in the CAT category. IV 600V – outdoor el. installation (securing elements, beginning of internal installation)
– the maximum display of the main display is 40000, of the secondary displays 4000
– type backlit LCD display with dark data on a light background, 3 backlight values
– the display range is ± 40000 for measuring voltages, currents, resistances and frequencies.
– refresh rate for most measurements 2 to 3 times per second
– analog bargraph indicator 40 segments, speed 10 views / sec.
– setting ranges automatic or manual
– measuring ranges of AC voltage (alternating current): 4 V / 1000 V, True RMS 0 to 1000 V, bandwidth 100 kHz
– AC current measuring ranges: 400 μ A / 10 A bandwidth 45 Hz to 10 kHz
– measuring ranges of DC voltage (direct current): 400 mV / 1000 V
– DC current (DC) measuring ranges: 400 μ A / 10 A
– resistance measuring ranges: 400 Ω / 40 MΩ
– capacitor capacity measuring ranges: 40 nF / 40.00 mF
– frequency measuring ranges: 40 Hz / 400 MHz
– temperature measuring ranges in ° C (-40° C to 1000° C) and in ° F (-40° F to 1832° F)
– high accuracy
– built-in memory for 9999 records
– measurement of effective values ​​of voltage st. voltages and currents (TRMS)
– during the measurement of alternating voltages, it is possible to measure the frequency or voltage alternation on two secondary displays
– on the secondary display it is also possible to measure the AC component superimposed on the DC voltage
– relative measurement mode
– MAX and MIN peak measurements
– low battery indication
– automatic shutdown (sleep on inactivity)
– protection of voltage inputs against overload
– protection of current inputs by fast fuses
– input impedance 10MΩ , in the range 400mV / DC to 2.5GΩ
– test of diodes and semiconductor transitions with voltage 0 to 3V
– supplied temperature probe type “ K” for measuring temperatures up to 230° C
– supplied USB cable with opto-electric converter, software can be downloaded from the manufacturer’s website: https: //meters. uni-trend. com/product/ut71-series/#Docs
– it is possible to buy a Bluetooth adapter UT-D07A
– measurement in elmag is also possible. field with intensity up to 1V / m with additional error 5%