Hirst GM05 Gauss metar za merenje jacine magneta

Prodajem Hirst GM05 Gauss metar za merenje jacine magneta.

Uredjaj nije jeftini kineski nego je proizveden u Engleskoj i koristi se u profesionalne svrhe.

Uz njega dolazi i aksijalna sonda, cija je inace cena preko 300 EUR.

https: //www. gaussmeter. co. uk/AP002-axial-hall-probe

Merenja se mogu ocitavati u  jedinicima: Tesla, Gauss, Amps/m ili Oersted.

Moguca svaka proba i provera.

GM05 Specifications:

Auto Ranging And Manual Ranging:
Range 1:0 - to more than 3 Tesla resolution 1 milliTesla.
Range 2: 0 - 299.9 milliTesla resolution 100 microTesla.
Range 3: 0- 29.99 milliTesla resolution 10 microTesla.
Range 4: 0- 2.999 milliTesla resolution 2 microTesla.
Measurements can be made in Tesla, Gauss, Amps/m or Oersted.
(1 mT = 10 Gauss = 0.796 kA/m)
Accuracy (at 20C) +/- 1%
(DC) Traceable NPL Reproducibility +/- 0.5%
Temperature Coefficient: Better than +/- 0. 1% of reading degrees C including probe.
Frequency Range: DC and 15Hz to 10 kHz.
Averaging Time Constant: 100 milliseconds.
Functions: DC, DC Peak, AC RMS, AC RMSMAX, AC PEAK
Display: 2 Line, 16-character dot matrix LCD.
Display Sampling Rate: 3/sec (approx. )
Facilities: Store and Recall on 0 - 99 samples. Hold facility. Analogue Peak with digital storage. Auto and manual ranges. Automatic reading conversion between different units. Operating set up at time of power-down is stored and recalled automatically at power-on. Utilities etc. Functions are selected with an easy to use menu.
Operating Temp. Range 0C to +50C
Storage Temp. Range -20C to +70C
Battery Type: 9V Longlife Alkaline (Duracell MN1604) or similar (not supplied).
Battery Life: approximately 15 Hours continuous operation. Auto Power-down after 1, 4 or 10 minutes or can be disabled, all under menu control.
Dimensions:
Length. 196 mm
Width. 100 mm
Height. 40mm
Weight. (inc battery) 400 g (not including probe)

GM05 Additional Features:
RS232 Interface. Used for data transfer and remote control. BAUD rate 300 to 4,800. Software
Handshaking.
Non Volatile Memory. The GM05 will retain stored measurements for up to 2 months after the GM05 is switched off.
Time Keeping. The GM05 has a time keeping device so that the time that the measurements were taken can also be recorded.
External PSU Socket. The External PSU (not supplied) may be used to power the GM05 when used in bench top applications.
Additional Standard Accessories: Software Communications Software for IBM PC.
The probe is fitted with a push button enabling the operator to HOLD and
STORE measurements and orientate the probe for polarity readings.