METREL MI3000 Easy

Metrel MI3000 Easi Plus Multifunction Tester

Specification

• More Information
• Specification
• Continuity Test R1 &R2
• Insulation tests @ 100v, 250v, 500v, and 1000v
• Insulation range up to1000MΩ
• Complete RCD Auto Test - "All 6 tests in 1 visit"
• RCD Ramp Test - indicates actual trip current
• RCD Triplock - Guaranteed not to trip RCD's
• Loop, ZE, ZS,110V,230V and 415V
• PSC (Measure the potential fault current between phase/neutral and earth/neutral conductors), LE and LN
• Multi Voltage System Support
• Multi Voltage Monitor "online" single/3 phase
• Phase rotation
• Polarity Test
• Frequency Test

The Metrel MI3000 Multifunction Tester allows fixed electrical installations in both commercial and domestic environments to be fully tested in compliance with the Part P and 17th Edition regulations. It is the most cost effective MFT on the market and is a firm favourite with electrical installers and commissioning engineers.

The MI3000 can perform a variety of electrical tests including continuity, insulation up to 1000V, fully automatic RCD testing (with ramp test), earth loop impedance testing, real-time AC voltage monitoring, PSC (prospective short circuit current) and phase rotation testing.

The new and improved model also provides automatic pass and fail indication on loop (Zs) testing. Simply enter the circuit protective device and its rating and the unit will show either a tick or cross to indicate whether the measured Zs value is compliant or not. The value will also be displayed in Ohms so you can record this on your certificates.

In addition, the newly designed Metrel MI3000 offers onscreen schematic help diagrams so that users can be confident that they have correctly connected the test leads to the conductors. These help diagrams are easily accessed for a range of tests from R1+R2 continuity testing to loop testing across line conductors in a three phase installation.

Metrel MI3000 Key Features:

• 17th edition compliant on both single and three phase installations
• Real-time Voltage Monitoring
• Automatic Pass/Fail indication on loop testing
• Fully automatic RCD Testing with Non-Trip Feature
• Inbuilt battery charger and rechargeable batteries supplied.
• Supports 110V systems
• Lightweight, compact and easy to use, now with schematic help diagrams
• Includes 2 year manufacturer's warranty and Calibration Certificate

Voltage protection is provided on all test ranges preventing damage if the tester is incorrectly connected across phases, while the 6-in-1 test mode makes short work of RCD testing. Reset the breaker and the Metrel MI3000 will continue to carry out the test with the ramp test indicating actual trip current and the RCD Triplock feature preventing any RCDs from tripping.

The long term reliability of this multifunction tester is guaranteed by Metrel's 2 year warranty and the ability to update the onboard firmware to comply with any future changes in regulations.

Cena je 300 evra FIKSNO, ne predlagati zamenu.