Multimeter UNI-T UT201R clamp - amper klesta

1. AC current measurement (ranges / resolution / accuracy):

4,000A / 0.001A / 50Hz ~ 100Hz ± (4.0% + 10)
40.00A / 0.010A / 50Hz ~ 100Hz ± (2.0% + 10)
400.0A / 0.100A / 50Hz ~ 100Hz ± (2.0% + 10)
– frequency monitoring accuracy when measuring AC current in the range of 50 to 100Hz is ± (1.0% + 5) at 0.1Hz resolution
– overload protection at 420A

2. AC voltage measurement (range / resolution / accuracy):

4.000V / 0.001V / 10Hz ~ 10kHz ± (1.0% + 5)
40.00V / 0.010V / 10Hz ~ 10kHz ± (0.8% + 5)
400.0V / 0.100V / 10Hz ~ 10kHz ± (0.8% + 5)
600.0V / 1,000V / 10Hz ~ 10kHz ± (0.8% + 5)
– frequency monitoring accuracy when measuring AC voltage in the range of 10 to 10k ± (1.0% + 5) at a resolution of 0.01Hz to 0.01kHz
– overload protection at 600Vrms
– input impedance approx. 10MGΩ

3. DC voltage measurement (range / resolution / accuracy):

400.0mV / 0.100mV / ± (0.7% + 3)
4.000V / 0.001V / ± (0.5% + 2)
40.00V / 0.010V / ± (0.7% + 3)
400.0V / 0.100V / ± (0.7% + 3)
600V / 1,000V / ± (0.7% + 3)
– input impedance approx. 10MΩ
– overload protection at 600Vrms

4. Resistance measurement (ranges / resolution / accuracy):

400.0Ω / 0.1Ω / ± (1.0% + 2)
4,000kΩ / 0.001kΩ / ± (0.8% + 2)
40.00kΩ / 0.01kΩ / ± (0.8% + 2)
400.0kΩ / 0.1kΩ / ± (0.8% + 2)
4,000MΩ / 0.001MΩ / ± (2.0% + 5)
40.00MΩ / 0.01MΩ / ± (2.0% + 5)
– overload protection at 600 Vrms

5. Circuit continuity check:

– if the measured resistance is less than 10Ω , the signal of the continuous circuit sounds a buzzer
– if the measured resistance is greater than 31alizace, the open circuit signal does not sound a buzzer
– open circuit voltage about 2.0V
– measurement in the range of 400Ω
– overload protection at 600 Vrms

6. Measurement of diodes:

– in the forward direction, the voltage drop of the semiconductor junction is less than or equal to 2.0V
– for a silicon junction, a typical voltage drop is 0.5 to 0.8V
– open circuit voltage about 2.2V
– measurement in the range of 4,000V

7. Non-contact electric field sensing (NCV):

– allows to detect live conductors in two sensitivities -EFLo and – EFHi for low voltage distribution 110V/50/60Hz and 230V/50/60Hz.

Other parameters:

– measurement of maximum and minimum values: ano
– HOLD: ano
– low battery indication: ano
– automatic power off: ano
– battery supply 1.5 V (R03): 2pcs
– backlit display size: 37 mm x 25 mm
– product dimensions: 215 mm x 63 mm x 36 mm
– net weight of the product: 248 g
– product color: red and gray

Package contents:

– clamp multimeter UT201R: 1pc
– test leads: 1 pair
– battery 1.5 V (R03): 2pcs
– instructions for use: 1pc