Arduino senzor brzine i pozicije TIP2

Ekstra povoljan senzor! ! !
Idealan za arduino aplikacije u kojima vam je potrebno brojanje impulsa(detekcija brzine. . . )
Specifikacija: Radni napon: 3.3V~5V Tezina
Otvor u optokapleru 7mm
Application: Widely used in dynamo speed detecting, pulse counting, etc Output form: Digital switch output (0 and 1) and Analog for Sensitivity.
Specifications: Working voltage: 3.3V-5V Output form: digital switch OUT output (0 and 1) Instructions for Use: 1. Connect VCC and GND, the module signal indicator will light up. 2. When there is no occlusion in the module slot, the receiving tube is turned on, and the module OUT outputs a high level; when occluding, the OUT output is low, and the signal indicator is off. 3. The module OUT can be connected to the relay to form a limit switch and other functions. It can also be connected to the active buzzer module to form an alarm. 4. The OUT output interface can be directly connected to the IO port of the MCU. Generally, it is connected to an external interrupt to detect whether the sensor has a occlusion. If the motor code plate is used, the motor speed can be detected.