BMS-3S Litijumski punjač 60A / Zaštita za 3 baterije-18650 B

Napon punjenja: 12.6V-13V


Karakteristike: Opseg primene: Pogodno za litijumske baterije sa nominalnim naponom od 3,7V i punim naponom od 4,2V (uključujući 18650, 26650, polimer litijumske baterije, bez ograničenja veličine).

Veličina proizvoda: 41*62*3,4 mm (balanced version)

Napon punjenja: 12.6V - 13V

Kontinuirana struja pražnjenja (gornja granica): 60A (Ako okruženje za rasipanje toplote nije dobro, smanjite struju opterećenja)

Kontinuirana struja punjenja (gornja granica): 15A


Balance version: Suitable for electric drills with starting current below 120A and power below 260W, with balanced charging function.

Note 1: Successfully start the drill requires 3 15C-20C power batteries, or 6 10C-15C power batteries (recommended power battery models: VTC4, VTC4A, VTC5A, VTC6); 0V and 12.6V cable, Use copper wire above 4 mm2 (cannot use nickel plate! ! ! ).

Note 2: Strictly follow the wiring of the diagram 0V, 4.2V, 8.4V, 12.6V, do not intentionally short circuit.


Note 3: When charging the battery, the "430" resistance heating is normal, indicating that the equalization circuit is working; if the "430" resistor is also hot in the uncharged state, please check if the wrong line is connected.

For some customers with poor electronic foundation, please explain: Do not mix good battery and poor battery! The closer the capacity/internal resistance of the 3 batteries is, the better! (The effect of 2 good batteries + 1 poor battery) = 3 use of poor battery).


Važna napomena:

Testiram pre slanja i nema šanse da pošaljem neispravn BMS tako da ne primam nikakav oblik reklamacije: da je stigao neispravan, da vam je crkao itd. . . niti prava na negativnu ocenu. Ako vam ovi uslovi ne odgovaraju odmah odustanite od kupovine.
**********************************************************************************************************************

Pogledajte i ostale moje oglase,  svi predmeti koji imaju cenu su na lageru i odmah DOSTUPNI ! ! !