> DC-DC 160W sa kucistem i LCD displejem<

DC/DC konvertor koji moze da meri napon i struju sa kucistem od pleksiglasa.
Odlicnan kao mali laboratorisjki ispravljac kome moze da se menja napon i struja, led drajver, punjac baterija. . .
Ulazni napon mora da bude bar 2V visi od izlaznog.
Maksimalna struja mu je do 12A kratkotrajno a 8A na duze staze a snaga 120W standardno a 160W ako se obezbedi dodatno hladjenje, ventilator.

Kada se koristi za punjenje baterija potrebno je staviti diodu (dolazi uz uredjaj) da bi se zastitio od povratnog napona.

 1. Product highlights:
 
1.1 Crystal housing, elegant design, touch the touch of good quality;
 
1,2 Press the button to control the on / off output, and you can set the default power on or off;
 
1.3 LCD can show input and output voltage, output power output current;
 
Input anti-reverse protection of 1.4, the reverse will not burn;
 
1.5 High efficiency of 95% or more, high current, low heat, output voltage of 1.2-32 V arbitrary regulation, adjustable constant current value 0-12A, suitable for high power LED constant current unit , Battery charge!
 
2. Product parameters:
 
Input voltage: 5.3-32 V (35 V limit, the lowest input of 4 V to get buck, but less than 5.3 V input voltage and inaccurate current measurements)
 
Output voltage: 1.2-32 V (you must ensure that the input voltage is higher than the output voltage, the minimum voltage difference between the two V 0.8)
 
Output current: stable long-term work in 8A, strengthen the heat can reach 12A
 
Output power: Natural cooling 120 W (8 a or less), to improve cooling 160 W
 
Voltage display: Resolution 0.05 V, range 0-32 V
 
Current screen: Resolution 0.01A, range 0-12A
 
Conversion efficiency: around 96%
 
Operating current: 25 mA more or less
 
Soft start: Yes (very powerful with load module may not start)
 
Reverse entry protection: Yes
 
Anti-Input Output: None (if you charge the battery, the first module to power the battery and make sure that the battery voltage is lower than the output voltage, if the conditions are a positive output in series with anti-flow diode)