DC motor sa stalnim magnetom, magnetni Hol enkoder

DC motor sa stalnim magnetom, magnetni Hol enkoder, potpuno metalni motor zupčanika

SKU:  22346
Part Number:  DCGM-3865-12V-EN-240RPM

L-Shaped Permanent Magnet DC Gear Motor, Magnetic Hall Encoder, All-Metal Gear Motor L-Shaped Permanent Magnet DC Gear Motor

All-metal Gear, Magnetic Hall Encoder

Mainly Used In Short Wheelbase Robots, And L-Shaped Applications
No Self-Locking Function In The Reducer, The Output Shaft Can Be Rotated By Hand


Specifications

WORKING VOLTAGE DC 12 V
RATED POWER 5.2 W
NO-LOAD SPEED 240 rpm
LOCKED-ROTOR TORQUE ≥8.5 kg. cm
NO-LOAD CURRENT 0.15 A MAX
LOCKED-ROTOR CURRENT ≤3.5 A
RATED LOAD 4.0 kg. cm
HALL RESOLUTION Basic 11 PPR × 42 = 462 PPR
RATED SPEED 125 rpm
GEAR REDUCTION RATIO 1:42
RATED CURRENT 1.0 A MAX


Encoder Specifications

TYPE AB Dual-Phase Incremental Magnetic Hall Encoder
LINE RATE Basic pulse 11 PPR x Gear reduction ratio
POWER SUPPLY DC 3.3V / DC 5.0V
BASIC FUNCTION with pull-up resistor, directly connect to MCU
INTERFACE TYPE XH2.54-6PIN
OUTPUT SIGNAL TYPE Square wave AB phase
RESPONSE FREQUENCY 100 KHz
BASIC PULSES 11 PPR
MAGNETIC RING TRIGGER POLES NUMBER 22 poles (11 pairs of poles)

WIKI:  www. waveshare. com/wiki/DCGM-3865-12V-EN-240RPM


PACKAGE CONTENT

Weight:  0.167 kg

Package Contains

1. DCGM-3865-12V-EN-240RPM                                      x1

w22346

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.