L76B GNSS Modul Za Raspberry Pi Pico, GPS / BDS / QZSS

SKU:  20072
Part Number:  Pico-GPS-L76B

L76B GNSS Module For Raspberry Pi Pico, GPS / BDS / QZSS Support L76B GNSS Module For Pico

GNSS Module Based On L76B, Designed For Raspberry Pi Pico

Features At A Glance

The Pico-GPS-L76B is a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it’s easy to use global navigating function.

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
• Multi satellite systems support: GPS, BDS, and QZSS
• EASY, self track prediction technology, help quick positioning
• AlwaysLocate, intelligent controller of periodic mode for power saving
• Supports D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
• UART communication baudrate: 4800~115200bps (9600bps by default)
• Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
• 4x LEDs for indicating the module operating status
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Specifications:

GNSS Frequency band:
GPS L1 (1575.42Mhz)
BD2 B1 (1561.098MHz) Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch C/A code SBAS: WAAS, EGNOS, MSAS, GAGAN
Horizontal position accuracy (autonomous positioning) <2.5m
CEP Time-To-First-Fix @ -130dBm(EASY enabled) Cold starts: <15s Warm starts: <5s Hot starts: <1s Sensitivity Acquisition: -148dBm Tracking: -163dBm Re-acquisition: -160dBm Dynamic performance Altitude (max): 18000m Velocity (max): 515m/s Acceleration (max): 4g OTHERS Communication interface UART Baudrate 4800~115200bps (9600bps by default) Update rate 1Hz (default), 10Hz (max) Protocols NMEA 0183, PMTK Power supply voltage 5V Operating current 13mA Overall current consumption <  40mA@5V (Continue mode) Operating temperature -40℃ ~ 85℃ Dimensions 52 × 21mm Raspberry Pi Pico Header Compatibility

Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico

Raspberry Pi Pico is NOT included. GNSS Positioning

Multi Satellite Systems Support: GPS, BDS, And QZSS

Augment Systems Support

Augment System Is Aimed At Improving The Accuracy, Integrity, Reliability, And Availability Of Positioning And Navigation

Supports Augment Systems Including D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)

What’s On Board

1. L76B module
2. Battery holder
   supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
3. GNSS antenna connector
4. Raspberry Pi GPIO header

1. Standby mode switch
2. Backup mode wakeup button
3. RT9193-33
   power chip
4. Status indicators
   RXD/TXD: UART TX/RX indicator
   PPS: GPS status indicator
   PWR: power indicator

PACKAGE CONTENT

Weight:  0.076 kg

1. Pico-GPS-L76B x1
2. GPS Antenna x1

Wiki:  Pico-GPS-L76B

w20072

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.