USB HAT (type C) na UART Board (TTL) za Raspberry Pi

SKU:  20645

Part Number:  PL2303 USB UART Board (Type C)

PL2303 USB To UART (TTL) Communication Module, USB-C Connector PL2303 USB-C To UART Module

Adopts PL2303, Compatible With 1.8V/2.5V/3.3V/5V Logic Level

Features At A Glance

• Adopts PL2303GS new version device
• Supports windows XP/7/8/10/11/. . .
• 3x VCCIO power mode via jumper setting:
  • VCCIO - 5V:  5V output
  • VCCIO - 3.3V:  3.3V output
  • open the jumper:  powered from target board (1.8V/2.5V/3.3V/5V)
• 3x LED indicators: TXD, RXD, PWR

PL2303 Solution

Adopts PL2303GS New Version Device

Hardware Connection

In The Case Of Working With MCU

• VCCIO ↔ 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
• GND ↔ GND
• TXD ↔ MCU. RX (signal direction: MCU. RX < < PL2303 < < PC. TX)
• RXD ↔ MCU. TX (signal direction: MCU. TX > > PL2303 > > PC. RX)

CAUTION: the module is compatible with TTL level ONLY, to avoiding any damage, please DON'T direct connect it to RS232 circuit.  

PACKAGE CONTENT

Weight:  0.008 kg

1. PL2303 USB UART Board (Type C) x1
2. 4-pin custom connector jumper wire x1

Wiki:  PL2303_USB_UART_Board_(Type_C)

w20645

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.