> Dvostruki termostat STC3008 na 220V <

Termostat koji ima dve nezavisne sonde i moze da kontrolise dve temperature na hladjenju i grejanju.
Pri jacem opterecenju preporucuje se stavljanje dodatnog relea / kontaktera.


Opseg regulisanja temperature: -55 ° C ~ 120 ° C
Rezolucija: 0.1C
Napon napajanja:   AC 220V
Potrosnja: >3W
Struja kontakta relea: AC 10A/220V
Duzina kabla senzora: 1m
Radna temperatura: 0~60 C
Dimenzije:   84x69x34mm

Features:

1. Automatic conversion of refrigeration and heating mode

2. Control mode of return difference; Temperature display resolution 0.1

3. The temperature controller has the characteristic of high accuracy, high sensitivity, high stability.

4. Support temperature correction and support for power loss (the parameters of the sudden power failure are still valid

5. Application range is like home temperature control, farm, various cold storage, greenhouse, aquarium, etc

Specifications:

Display Type: Digital

Style: Standing Station

Temperature sensor: NTC 10K

Senor length:1.0m

Temperature measuring range: -55 ° C ~ 120 ° C

Resolution: 0.1 ° C

Accuracy: ±1° C

Power supply:   220V AC

Power consumption: <3W

Storage temperature: -30 ° C ~ 75 ° C

Relative humidity: 20% ~ 85% (No condensate)

Relay contact capacity: Two Relay Cool 10A/240VAC;  Heat 10A/240VAC

 -------------------------------
Set startup temperature:
Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds, The required temperature can be set by the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
 
Press "Up 1" Button &"Up 2"Button at the same time to setting mode
Code     Function     Set Range     Default
P1       Compressor 1 delay time         0-60min     0min
P2      Compressor 2 delay time         0-60min     0min
P3      High temperature alarm value         55-120 ° C      120 ° C
P4     Low temperature alarm value          55-120 ° C      -55 ° C
 
How to restore factory Settings
press the "Down 1" and "Down 2" button at the same time,   the factory setting is restored
 
Heating Mode--Start temperature< Stop temperature
Cooling Mode--Start temperature> Stop temperature
You can set 1 heating 1 cooling or 2 cooliong or 2 heating.