Obradna glava sa automatskom izmenom alata Rattm motor 1,8Kw

Obradna glava sa automatskom izmenom alata Rattm motor 24000 rpm 1,8 KW Sa Nosacem

1.8KW ATC water cooled spindle motor 220V 5.4ARTM80-20-24Z/1.8 model

1. Product overview

1) This spindle is built-in type spindle motor, built-in three asynchronous motors, by theinverter control. As the spindle has a compact structure, high power, big torque, small vibration, low noise characteristics, so it can achieve high speed, high powe cutting, high precision and highstability operation.   2) The bearing of spindle use grease lubricated angular to contact bearings, can beachieved lifelong lubricating within the life cycle.   3) The spindle use forced coolling mode to coolling motor, front and rear bearings. Coolantflow through the reasonable arrangement cycle watercourse of the spindle body, thus can takethe heat generated of the spindle rotation speed, to achieve thermal equilibrium, let spindletemperature within a certain constant value. External cooling device effect: maintaining aconstant temperature of the coolant.   4) The spindle built-in PTC 140 temperature sensor(Technical parameters are visible inother sections of this specification), you can read it anytime if you need to protect the motortemperature.   5) The tool clamping methods: this spindle built-in automatic tool change device, shank form is ISO20