AXILE G8 Vertical Machining Center

This AXILE G8 Vertical Machining Center was made in the year 2021 and has 3624 hours. It is equipped with a HEIDENHAIN TNC 640 control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

Overview

• BRAND:  AXILE
• YEAR:  2021
• MODEL:  G8
• PRODUCTION HOURS:  3624
• APPLICATION TYPE:  MILLING
• LOCATION:  POLAND
• MACHINE TYPE:  MACHINING CENTERS (VERTICAL)
• AVAILABILITY:  IMMEDIATELY
• CONTROL UNIT BRAND:  HEIDENHAIN
• GINDUMAC ID:  PL-MIL-AXI-2021-00001

Technical Information

GENERAL DATA

• MEASUREMENTS WIDTH:  3395 MM
• MEASUREMENTS DEPTH:  4275 MM
• MEASUREMENTS HEIGHT:  3779 MM
• MACHINE WEIGHT:  18000 KG

CONTROL UNIT

• BRAND:  HEIDENHAIN
• MODEL:  TNC 640

MAIN DRIVE

• SPINDLE SPEED RANGE:  15000 1/MIN
• SPINDLE MOTOR POWER:  S1/S6-40% - 30/46 KW
• TOOL TAPER:  HSK A63
• NUMBER OF AXIS:  5

MOVEMENT

• X-AXIS MOVEMENT:  670 MM
• Y-AXIS MOVEMENT:  820 MM
• Z-AXIS MOVEMENT:  600 MM

TABLE

• TABLE LOAD:  1300 KG

MEDIA

• POWER CONSUMPTION:  85 KVA

Additional Information

MACHINE BENEFITS

• TECHNICAL MACHINE BENEFITS:
  • - TABLE DIM. : 800 MM
  • - MAX WORKPIECE DIM. : 920 MM
  • - MAX WORKPIECE HEIGHT: 500 MM
  • - COOLING THROUGH THE SPINDLE: 20 BAR
  • - SURGE PROTECTION SYSTEM EMC
  • - COOLING SYSTEM FOR THE SPINDLE AND ROTARY TABLE DRIVES
  • - THREE GUIDES FOR THE Z-AXIS
  • - OPTICAL RULERS IN X, Y, Z AXES
  • - AAC - AXIAL ACCURACY CONTROL
  • - TPC - TOOL TIP POSITIONING CONTROL
• QUALITATIVE MACHINE BENEFITS:
  • - DCM - DYNAMIC COLLISION MONITORING
  • - HEIDENHAIN TS-740 WORKPIECE PROBE
  • - BLUM LASER PROBE FOR TOOLS
  • - MANUAL KNOB FOR SETTINGS, EMC, CE CERTIFICATE
  • - TOOLS MAGAZINE: 32
  • - MAX TOOL SIZE: DIM 120 X 300 MM
  • - A-AXIS MOVEMENT: +120 / - 120 DEG
  • - C-AXIS MOVEMENT: 360 DEG

Moguće je obaviti pregled i testiranje na lokaciji stroja. Demontažu i transport možemo organizirati mi.

Za dodatne informacije ili vašu ponudu, stojim vam na raspolaganju.

 

Srdacan pozdrav,
Manuel Gricar
Tel: +386 30 339 402
E-pošta: m. gricar@gindumac. com