deckel maho DMC 835 V

This DECKEL MAHO DMC 835 V Vertical Machining center was made in 2007 and has 30129 hours. It is equipped with a HEIDENHAIN TNC 530 control unit and has 3 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

Overview

• BRAND:  DECKEL MAHO
• YEAR:  2007
• MODEL:  DMC 835 V
• PRODUCTION HOURS:  30129
• APPLICATION TYPE:  MILLING
• LOCATION:  POLAND
• MACHINE TYPE:  MACHINING CENTERS (VERTICAL)
• AVAILABILITY:  IMMEDIATELY
• CONTROL UNIT BRAND:  HEIDENHAIN
• GINDUMAC ID:  PL-MIL-DMG-2007-00001

Technical Information

CONTROL UNIT

• BRAND:  HEIDENHAIN
• MODEL:  ITNC 530

MAIN DRIVE

• SPINDLE SPEED RANGE:  10000 1/MIN
• SPINDLE MOTOR POWER:  13/89KW
• NUMBER OF AXIS:  3

MOVEMENT

• X-AXIS MOVEMENT:  835 MM
• Y-AXIS MOVEMENT:  510 MM
• Z-AXIS MOVEMENT:  510 MM

TABLE

• OUTER LENGTH:  1000 MM
• OUTER WIDTH:  560 MM
• TABLE LOAD:  800 KG

TOOLS

• SLOTS IN STORAGE:  40
• TYPE OF TOOL HOLDER:  SK 40

Additional Information

MACHINE BENEFITS

• TECHNICAL MACHINE BENEFITS:
  • - ELECTRONIC HANDWHEEL
  • - TOOL MEASUREMENT PROBE TT130
  • - INTERNAL COOLANT SUPPLY THROUGH THE CENTER OF THE SPINDLE, IKZ BELT FILTER SYSTEM 20 BAR / 600 LITERS
  • - CHIP CONVEYOR, GUN FOR FLUSHING THE WORKING AREA
  • - COMPRESSED AIR BLOW-THROUGH THE SPINDLE ACTIVATED BY M FUNCTIONS
  • - MACHINE BED FLUSHING SYSTEM
  • - WORKSPACE ROOF
  • - WORK MODE 4 - ABILITY TO WORK WITH THE OPEN DOOR OF THE WORKSPACE
  • - TWO-CIRCUIT HYDRAULIC UNIT 50-240 BAR FOR ZERO-POINT SYSTEMS- THIS ADDITIONAL HYDRAULIC AGGREGATE
  • - AUTOMATIC MACHINE RIGHT DOOR FOR EFFICIENT WORKPIECE LOADING ROBOT INTERFACE
• QUALITATIVE MACHINE BENEFITS:
  • - THE MACHINE IS IN VERY GOOD WORKING CONDITION AND READY FOR TESTS
  • - DOCUMENTATION AND FULL VOT GEOMETRIC REPORT AVAILABLE.

Moguće je obaviti pregled i testiranje na lokaciji stroja. Demontažu i transport možemo organizirati mi.

Za dodatne informacije ili vašu ponudu, stojim vam na raspolaganju.

 

Srdacan pozdrav,
Manuel Gricar
Tel: +386 30 339 402
E-pošta: m. gricar@gindumac. com