Fanuc Robodrill ALPHA T21iFA Vertical Machining Center

 

This Fanuc Robodrill ALPHA T21iFA Vertical Machining Center was manufactured in the year 2011 and has 33661 hours. It is equipped with a Fanuc Series 31i-MODEL A5 control unit and has 4 axes. The machine has a spindle speed of 10000 rpm and comes with a robot cell and robot.

**Overview**
- **BRAND: ** FANUC
- **YEAR: ** 2011
- **MODEL: ** ROBODRILL ALPHA T21IFA
- **PRODUCTION HOURS: ** 33661
- **APPLICATION TYPE: ** MILLING
- **LOCATION: ** GERMANY
- **MACHINE TYPE: ** MACHINING CENTERS (VERTICAL)
- **AVAILABILITY: ** IMMEDIATELY
- **CONTROL UNIT BRAND: ** FANUC
- **GINDUMAC ID: ** DE-MIL-FAN-2011-00001

**Technical Information**

**CONTROL UNIT**
- **BRAND: ** FANUC
- **MODEL: ** SERIES 31I-MODEL A5

**MAIN DRIVE**
- **SPINDLE SPEED RANGE: ** 10000 1/MIN
- **NUMBER OF AXIS: ** 4

**MOVEMENT**
- **X-AXIS MOVEMENT: ** 500 MM
- **Y-AXIS MOVEMENT: ** 400 MM
- **Z-AXIS MOVEMENT: ** 330 MM

**Additional Information**

**MACHINE BENEFITS**

**TECHNICAL MACHINE BENEFITS: **
- Machine comes with robot cell and robot.
- Acceleration in X/Y/Z 1.5 G, rapid traverse speed 54000 MM/MIN.
- BBT30 BIG PLUS tool holder.
- Machine tool in cast iron construction controlled axes.
- Axis drives Fanuc ALPHA I. AC servo motors.
- Universal clamping table.
- Interior lighting.
- Stand elevation 100 MM.
- Automatic Vogel "centralised oil lubrication" nano-interpolation of the servo axes.
- Thermal compensation (XYZ axis).

**QUALITATIVE MACHINE BENEFITS: **
- Memory 512 KB/1280 M, 1000 registerable programs.
- 48 additional workpiece, coordinate systems (G54.1), multi-step skip (G31 P1-4) AL contour control 1(30 blocks preview) helical interpolation.
- Coolant unit 300L with bed flushing.
- 20 BAR IKZ pump, Fanuc own torque motor with an indexing - indexing speed of 0.28 sec. at 180° - max. max. speed 200 RPM. (4th axis) rotary feed-through special 180 AR OMP 40 probe.
- Large coolant tank with pump for external cooling, bed flushing and IKZ pump with 20 BAR.
- Filtration takes place via plug-in sieves and Mahle slotted filters.
- The system is not a coolant cleaning system.
- Chips fall into trough excl. conveyor etc.
- Splash 1 spraying device splash" rinsing gun, Renishaw workpiece measuring system Fanuc rotary axis DDR260IB permanently installed in 300 | tank flushing gun with its own pump output max. 4BAR (at 20L/MIN) tool breakage detection tool breakage detection system incl. accessories tactile, Renishaw.

Moguće je obaviti pregled i testiranje na lokaciji stroja. Demontažu i transport možemo organizirati mi.

Za dodatne informacije ili vašu ponudu, stojim vam na raspolaganju.

 

Srdacan pozdrav,
Manuel Gricar
Tel: +386 30 339 402
E-pošta: m. gricar@gindumac. com