13.3inch E-Ink display HAT (K) for Raspberry Pi

960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface

 

N0V0

 

SKU:  25726
Part Number:  13.3inch e-Paper HAT (K)
Brand:  Waveshare

 

960×680, 13.3inch E-Ink Display HAT (K) For Raspberry Pi, SPI Interface 13.3″  E-PAPER HAT (K)

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

 

Ideal for price tags, shelf labels, industrial instruments…

 

Features At A Glance  

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V / 5V MCUs
• Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications  

 

OPERATING VOLTAGE 3.3V/5V

DISPLAY COLOR black, white

INTERFACE 3-wire SPI, 4-wire SPI

GREY SCALE 2

OUTLINE DIMENSIONS 286.32 × 212.26mm

FULL REFRESH TIME 5s

DISPLAY SIZE 275.52 × 195.16mm

REFRESH POWER 66mW

DOT PITCH 0.287 × 0.287mm

STANDBY CURRENT <0.01uA (almost none)

RESOLUTION 960 × 680 pixels

VIEWING ANGLE >170°

 

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

 

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

 

Onboard SPI Control Interface

For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/STM32/Arduino

 

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…

 

 

WIKI:  www. waveshare. com/wiki/13.3inch_e-Paper_HAT_(K)

 

 

PACKAGE CONTENT

Weight:  0.16 kg

 

1. 13.3inch e-Paper (K)                     x1
2. e-Paper Driver HAT                       x1
3. RPi screws pack (2pcs)                  x1
4. GH1.25 9PIN cable ~20cm            x1

   

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.