Ekran 2.13 inča, za Raspberry Pi (e-ink display)

SKU:  12915
Part Number:  2.13inch e-Paper HAT
Brand:  Waveshare

 

250×122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface 

 

2.13″  E-Paper HAT

Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect

 

Ideal for price tags, shelf labels, industrial instruments…

 

Features At A Glance  

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• SPI interface, for connecting with controller boards like Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V / 5V MCUs
• Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

 

OPERATING VOLTAGE 3.3V/5V

GREY SCALE 2

INTERFACE 3-wire SPI, 4-wire SPI

PARTIAL REFRESH TIME 0.3s

OUTLINE DIMENSIONS 65 × 30.2mm

FULL REFRESH TIME 2s

DISPLAY SIZE 48.55 × 23.71mm

REFRESH POWER 26.4mW (typ. )

DOT PITCH 0.194 × 0.194mm

STANDBY CURRENT <0.01uA (almost none)

RESOLUTION 250 × 122 pixels

VIEWING ANGLE >170°

DISPLAY COLOR black, white  

 

Advantages Of EINK

 

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

 

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

 

Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

 

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

 

 

WIKI:  www. waveshare. com/wiki/2.13inch_e-Paper_HAT

 

PACKAGE CONTENT

Weight:  0.014 kg

 

1. 2.13inch e-Paper HAT                     x1
2. RPi screws pack (2pcs)                   x1
3. PH2.0 20cm 8Pin                           x1

 

w12915

 

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.