Raspberry Pi Compute Module 4 IO Board

SKU:  18796
Part Number:  Compute Module 4 IO Board

Raspberry Pi Compute Module 4 IO Board, A Development Platform And Reference Base-Board Design For CM4 Compute Module 4 IO Board

The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.

The IO board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple.

Compute Module 4 IO Board also provides an excellent way to prototype systems using the Compute Module 4.

Interfaces Introduction

Specifications:
CM4 SOCKET suitable for all variants of Compute Module 4
CONNECTORS Standard Raspberry Pi HAT connectors with PoE support
Standard PCIe Gen 2 x1 socket
Various jumpers to disable specific features, e. g. wireless connectivity,
EEPROM writing RTC Real-time clock with battery socket and ability to wake Compute Module 4 VIDEO 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable)
CAMERA 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable)
USB 2 x USB 2.0 connectors Micro USB socket for updating Compute Module 4
ETHERNET Gigabit Ethernet RJ45 with PoE support
STORAGE SOCKET MicroSD card socket for Compute Module 4 Lite (without eMMC) variants FAN Standard fan connector
POWER INPUT 12V / 5V DIMENSIONS 160 × 90mm CM4 Base Board Selection Guide CM4 BASE BOARDINTERFACE COUNT AND SPECIFICATIONS POEGIGABIT
ETH40PIN
GPIOPCIEUSB①DSIHDMICSIRTCFAN
HEADERPOWER
INPUTFEATURES

MINI BASE A   ×1 √ M.2 M 2.0×4 ×1 ×2 ×2   5V 5V mini size
MINI BASE B   ×1 √ M.2 M 2.0×4 ×1 ×2 ×2 √ 5V 5V mini size
DUAL GIGABIT ETH   ×2 √   3.0×3 ×1 ×2 ×2 √ 5/12V 7-36V  
IOT BASE √ ×1   Gen2×1 2.0×2 ×2 ×2 ×2 √ 5/12V 7-36V 5G/4G support
RS232
RS485
ADC
POE BASE (B) √ ×1 √ Gen2×1 2.0×4 ×2 ×2 ×2 √ 5/12V 5V RS232
RS485
POE BASE √ ×1 √   3.0×4 ×2 ×2 ×2 √ 5/12V 7-36V  
RASPBERRY PI OFFICIAL ② ×1 √ Gen2×1 2.0×4 ×2 ×2 ×2 √ 12V 12V   NOTE ① USB 3.0 is equivalent to USB 3.2 Gen1
② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).

PACKAGE CONTENT

Weight:  0.107 kg

1. Compute Module 4 IO Board x1

 Wiki:  Compute-Module-4  

w18796

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.