Raspberry Pi Environment Multi Sensor HAT

SKU:  20471
Part Number:  Environment Sensor HAT

Environment Sensor HAT For Raspberry Pi, I2C Bus Environment Sensor HAT For Raspberry Pi

Features At A Glance

The Environment Sensor HAT is designed for Raspberry Pi, with rich onboard resources including ambient light sensor, VOC sensor, IR / UV sensor, gyroscope, accelerometer, magnetometer, barometer, temperature &humidity sensor, and so on. It uses the simple I2C bus for communicating with Raspberry Pi.

The Environment Sensor HAT gives Raspberry Pi the ability to collect environment data like temperature &humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc. It can also be used to build a robot that can detect motion and orientation.

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
• Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
• Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
• Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
• Onboard LTR390-UV-1 sensor, for measuring UV rays
• Onboard SGP40 sensor, for detecting ambient VOC
• I2C bus, allows retrieving data by just using two wires
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications:

TSL25911FN DIGITAL AMBIENT LIGHT SENSOR I2C address 0x29 Effective range 0~88000Lux BME280

TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR I2C address 0x76
Temperature detection -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy)
Humidity detection 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay) Air pressure detection 300~1100hPa (0.18Pa resolution, ±1hPa accuracy) ICM20948

MOTION SENSOR
(9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCROPE, 3-AXIS MAGNETOMETER) I2C address 0x68 Accelerometer resolution 16-bit Accelerometer range (configurable) ±2, ±4, ±8, ±16g Gyroscope resolution 16-bit Gyroscope range (configurable) ±250, ±500, ±1000, ±2000° /sec Magnetometer resolution 16-bit Magnetometer range ±4900µ T LTR390-UV-1 UV SENSOR I2C address 0x53 Response wavelength 280nm - 430nm

SGP40 VOC SENSOR I2C address 0x59 Measuring range 0 ~ 1,000 ppm ethanol equivalent Limit condition < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail) Response time < 10 s (tau 63 %) Start time < 60 s On-chip humidity compensation support Designed For Raspberry Pi Series

Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards for reference ONLY, the Raspberry Pi Zero WH is NOT included. What's On Board

1. Raspberry Pi GPIO
2. TSL25911FN
   digital ambient light sensor, for measuring IR and visible light
3. LTR390-UV-1
   UV sensor
4. SGP40
   VOC sensor

1. ICM20948
   3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer
2. BME280
   temperature, humidity, and air pressure sensor
3. Logic level conversion
   3.3V to 1.8V
4. Voltage regulator
   5V to 3.3V/1.8V

PACKAGE CONTENT

Weight:  0.018 kg

1. Environment Sensor HAT x1
2. 2x20PIN female header x1
3. 4PIN header x1
4. RPi screws pack (2pcs) x1

WIKI:  Environment_Sensor_HAT

w20471

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.