slika
slika
slika
slika
slika
slika
1 od 6

Raspberry Pi PN532 NFC HAT

2.490 din

Beograd
Novo
1.577
20
pre 12 dana
Odgovara na 99% poruka, uglavnom u roku od 15 minuta.
Malina 314 Doo online
Član od 17.05.2019.
kp izlog

SKU: 16958
Part Number: PN532 NFC HAT
Brand: Waveshare

PN532 NFC HAT for Raspberry Pi, I2C / SPI / UART

Overview

This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.

NFC (Near Field Communication) is a wireless technology allows contactless point-to-point data communication between devices within a short distance of 10 cm. It is widely used in applications such as access control system, smart tickets, meal card, etc.

Based on the popular NFC controller PN532 with multi interface options, this HAT will easily enable NFC function for your Raspberry Pi.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Onboard PN532 chip, supports various NFC/RFID cards like MIFARE/NTAG2xx, etc.
  • Three interface options: I2C, SPI, and UART, configured via jumpers and switches
  • Breakout control pins, for easily connecting with host boards like STM32/Arduino
  • Comes with development resources and manual (examples for Raspberry Python/C, STM32, Arduino)

Specifications

  • NFC controller: PN532
  • Operating voltage: 3.3V/5V
  • Operating frequency: 13.56MHz
  • Communication interfaces: I2C, SPI, UART (default)
  • Default baudrate: 115200 bps
  • Operating modes:
    • reader/writing mode supporting ISO/IEC 14443A / MIFARE scheme
    • reader/writing mode supporting FeliCa scheme
    • reader/writing mode supporting ISO/IEC 14443B scheme
    • card operation mode supporting ISO 14443A / MIFARE scheme
    • card operation mode supporting FeliCa scheme
    • ISO/IEC18092, ECM340 point-to-point

Applications

  • Contactless payment system
  • Bluetooth and WiFi devices chaining
  • Social sharing function like sharing contacts, photos, and videos
  • Smart phone NFC app

What’s on Board

 

  1. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
  2. PN532 control pins: for connecting with other host boards like STM32
  3. NFC induction coil
  4. PN532 chip: NFC controller
  5. Power indicator
  6. DIP switches: for configuring the connection between PN532 and Raspberry Pi (only one of the I2C/SPI/UART can be connected at the same time)
  7. Mode selection:
    • I0-L, I1-L: enable UART
    • I0-H, I1-L: enable I2C
    • I0-L, I1-H: enable SPI
  8. INT0 jumper: response signal, connects to Raspberry Pi D16
  9. RSTPDN jumper: reset signal, connects to Raspberry Pi D20

Dimensions

 

 

Package Content

 

Weight: 0.03 kg

Note: Raspberry Pi is NOT included.

  1. PN532 NFC HAT x1
  2. MIFARE Classic 1K Card x1

 

w16958

 

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

 

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.

ID Oglasa: #89225830
Informacije

Na našem sajtu proverite stanje zaliha ili ovde porukom.

Na našem sajtu svakog meseca atraktivni popusti.  
Platite karticom ili IPS QR kodom na našem sajtu.

Veliki izbor displeja (1-15"), LCD, E-ink.
RPi ploče
, kućišta, kablovi, kamere, memorijske kartice, dodatna oprema.   
Za fizička lica i firme.

Slanje sa DEX, BEX

PredlogProblemKontakt

U skladu sa Pravilima i uslovima korišćenja i Polisom o poštovanju privatnosti, KupujemProdajem koristi Cookie-je da bi obezbedio dobro korisničko iskustvo, prikazivanje personalizovanog sadržaja, prikazivanje reklama, kao i druge funkcionalnosti i usluge koje ne bismo mogli da obezbedimo bez Cookie-ja.