RS485 CAN HAT (B) za Raspberry Pi, izolovan

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections

SKU: 23227
Part Number: RS485 CAN HAT (B)
Brand: Waveshare

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 And 1-Ch CAN, Multi Protections
Isolated RS485 CAN HAT (B) For Raspberry Pi
2-Ch RS485 and 1-Ch CAN, SPI communication

Bulit-In Power Supply Isolation, ADI Magnetical Isolation, And TVS Diode, Etc.

Features At A Glance

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN
2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485
Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time
Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof &anti-electrostatic
Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
Onboard 120Ω terminal resistor, configured by jumper
Onboard terminals and pin headers, more convenient connection
Breakout SPI control pins, for connecting with host control boards

Specifications

EXPANDED INTERFACE                     2-Ch RS485 + 1-Ch CAN
COMMUNICATION INTERFACE          SPI
CAN CONTROLLER                            MCP2515
CAN TRANSCEIVER                            SIT65HVD230DR/SN65HVD23D
CAN BAUD RATE                                ≦1Mbps
UART EXPANSION CHIP                     SC16IS752
RS485 TRANSCEIVER                         SP3485
RS485 BAUD RATE                             300~921600 bps
POWER SUPPLY                                  External power supply terminal OR Raspberry Pi
EXTERNAL POWER SUPPLY RANGE    DC 8~28V
OPERATING VOLTAGE                         3.3V
DIMENSIONS                                      65 × 56.5 mm

What Can It Do?
Enable Isolated And Stable RS485 And CAN Capability For Your Raspberry Pi

Connect To Raspberry Pi Series
Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards

Expand 1-Ch CAN And 2-Ch RS485
CAN: Adopts Controller MCP2515 With CAN Transceiver
RS485: Adopts SC16IS752 And SP3485 Dual-Chip Combination

Industrial Grade Isolation Protection

Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption

WIKI: www. waveshare. com/wiki/RS485_CAN_HAT_(B)

PACKAGE CONTENT

Weight: 0.05 kg

RS485 CAN HAT (B) x1
2x20PIN female header x1
Screws pack x1

w23227

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

  Račun.
  Garancija.
  Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača.
  

  Malina314 doo

ꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥꕥ

Slanje sa kurirskim službama.

Plaćanje pre slanja ili pouzećem.

Malina314 doo
Pogledajte i naše druge oglase.

Volimo da prodajemo.