Plocice SBS 634 DC Dual Carbon Racing brake pads front R1 R6

Cena za par plocica je 45 € !  

CENA ZA 2 PLOCICE 45€ !

2 PARA PLOCICA 90€

One Set (two single pads) for one caliper. You need two sets for a full exchange.

Thickness complete: 8.8 mm; height x width: 51.3 x 69.2 mm; bolt hole: 6.6 / 8.0 mm

​Fits for: ​

- Yamaha YZF R1 from 2015 ongoing (RN32 inkl. "M")
- Yamaha YZF R1 1998 - 2006 (RN01, RN04, RN09, RN12)
- Yamaha YZF R6 from 1999 ongoing (all: RJ03, RJ05, RJ09, RJ11,  RJ15)
- Yamaha YZF R7 OW02  
​Carbon Racing pads have a much better performance than the older "classic" pads of sinter technologie, which is for many racers the crucial criteria,  if they have to break them in for one lap. You often find also in top racing categories riders who use carbon pads.  SBS is offering a very high level by long experiences in top motorsport classes.   Brake pads are one part of the whole bike setting for the rider. Depending on the rest of the setting, depending on driving skills, depending on budget and intended use, different brake pads may offer the optimum. The differences in possible lap times between from us offered brake pads are to be assumed about a second or less. You find some more difference in wear and price-performance ratio. The individual optimum additionally can strongly depend on the personal feeling for the brake. We suggest therefor to test and use experiences (also from other riders).   Changing pads (short manual / suggestion): - demount one caliper - take off the old pads (remove bolts / spring, push out depending on model) - clean the caliper complete (e. g. with teeth brush an detergent), check wear - lubrify the pistons with ATE piston paste (e. g. with a 2nd brush) - push back the pistons - lubrify the edges and the back side of the pads with copper paste (do not lubrify friction surface) - put the pads into the caliper like the old ones were in - assemble the caliper to the bike, check function - do the same with the 2nd caliper Optional depending on caliper: - check wear of bolts and springs, if is: replace - use ceramic paste instead of copper paste (special calipers according to producer) Always use fresh brake fluid and take care of a clean brake disk.