QSC RMX 5050 - Pojacalo

Player je jedan od regionalnih lidera u prodaji muzičke opreme i instrumenata.

U ponudi ima širok asortiman najeminentnijih svetskih proizvođača studijske, Pro,
DJ opreme, i rasvete.

Svakom kupovinom, dobija se fiskalni račun i garancija u trajanju od dve godine,
sa obezbeđenim zvaničnim servisom.

Moguće je plaćanje na 12 rata Banca Intesa kreditnim karticama - ukoliko robu kupite preko našeg web shopa ili u našim prodavnicama.

Za svaku kupovinu u vrednosti preko 2000 RSD poštarina je besplatna
na teritoriji Srbije!

Kako biste pogledali kompletan asortiman proizvoda, posetite naš web shop.

BROJ 1 U AMERICI, DALEKO ISPRED SVIH ! ! !

2 x 2500 W NA 2 OHM ! ! !  

RMX 5050

QSC\'s RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.   

Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a three-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD.  

FEATURES

• The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value
• The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications
• Dual mono, high current power supply for increased reliability and performance
• 3RU chassis only 16\" deep
• Professional quality performance - incorporates road-proven QSC designs
• High-current toroidal transformers for greater two-ohm power and low noise
• Independent user-defeatable clip limiters reduce distortion
• Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
• Balanced 1/4\" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility
• Binding post and Neutrik Speakon outputs
• Front mounted gain controls for easy access
• Signal and Clip LED indicators to monitor performance

SPECIFICATIONS

RMX 5050

  STEREO MODE, Both Channels Driven 8 ohms 
  FTC 20 Hz - 20 kHz, 0.1% THD
  EIA 1 kHz, 0.1% THD 
1050 W
1100 W 4 ohms
  FTC 20 Hz - 20 kHz, 0.1% THD
  EIA 1 kHz, 0.1% THD 
1600 W
1800 W 2 ohms 
  FTC 20 Hz-20 kHz 0.1% THD
  EIA 1 kHz 1% THD 
2000 W
2500 W   BRIDGE-MONO MODE 8 ohms 
  FTC 20 Hz-20 kHz 0.1% THD
  EIA 1 kHz 0.1% THD 
3200 W
3600 W 4 ohms 
   EIA 1 kHz 1% THD 
5000 W Distortion (SMPTE-IM) Less than 0.02% Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1 kHz and below: full rated power 
Less than 0.02%
Less than 0.02% Frequency Response

20 Hz - 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
5 Hz - 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB Damping Factor Greater than 250 @ 8 ohm Noise (unweighted) 100 dB below rated output (20 Hz - 20 kHz, 8 ohm load) Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms Voltage Gain 64x (36 dB) for 8 ohm load Input Impedance 20k ohm balanced, 10k ohm unbalanced Controls Front:  
Controls Rear:  

AC power switch, Ch. 1 and Ch. 2 gain control
10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel. Indicators

Power-On: Green LED, Protect: Red LED
Signal -30dB: Yellow LED, Clip: Red LED Connectors Input:  
Connectors Output: XLR female, TRS (1/4\"), and barrier-strip screw terminals, each channel
Binding posts and Speakon® outputs (Ch. 1 Speakon wired for biamp) Cooling Continuously variable-speed fan, rear-to-front air flow Amplifier Protection

Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads Load Protection On/off muting, DC fault output crowbar Power Requirements 100, 120 or 240 Volts AC (±10%) 50-60 Hz (factory configured)
120V models require 20 Amp service and are supplied with a NEMA 5-20 plug on the cordset. Dimensions 19\" (48.3 cm) wide, 5.25\" (13.3 cm) tall, 15.9\" (40.39 cm) overall depth Weight 75 lbs (34.02 kg) net, 87 lbs (39.46 kg) shipping 

Player | Muzičke Prodavnice

BEOGRAD:  
Svetogorska 9
+381 11 33-47-615
+381 11 33-47-442
+381 11 33-47-883

Sarajevska 68-70
+381 11 26 88 067
+381 11 26 88 068
+381 11 26 88 069

ZEMUN:  
Ugrinovački Put 10n
+381 11 3739 701
+381 11 3774 968
+381 11 3774 969

NOVI SAD:  
Futoški Put 1
+381 21 30 10 626
+381 21 30 10 627

NIŠ:  
Pantelejska 53
+381 18 42 00 878
+381 64 64 70 101

e-mail: info@player. rs
NE PRIHVATAMO ZAMENE